PubMed · 14077820
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
P L CERESETO, J M FERNANDEZ. 1963-08-15. [DRAINAGE].. https://pubmed.ncbi.nlm.nih.gov/14077820/
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
Magnetron co-sputtering was used to produce silicon-doped hydroxyapatite (Si-HA) as coatings intended for potential applications such as orthopedic and dental implants. It was found that the crystallinity of the as-sputtered coatings increased after annealing, resulting in a nanocrystalline apatite structure. Subsequently, the bioactivity of the coatings was evaluated in an acellular simulated body fluid (SBF). Physicochemical evaluation demonstrated that a carbonate-containing apatite layer, which is essential for bonding at the bone/implant interface, was formed on the coating surfaces after immersion in SBF between 4 and 7 days. The annealed coatings exhibited enhanced bioactivity and chemical stability under physiological conditions, as compared with the as-sputtered coatings. It is proposed that the rate at which the carbonate-containing apatite layer forms is dependent on the scale factor of the structure. A nanocrystalline structure can provide a higher number of nucleation sites for the formation of apatite crystallites, leading to a more rapid precipitation of carbonate-containing apatite layer. This work shows that Si-HA coatings offer considerable potential for applications in hard tissue replacement, owing to their ability to form a carbonate-containing apatite layer rapidly.
Headspace-solid phase microextraction (HS-SPME) was studied and optimised for the determination of four common organophosphorus pesticides (OPPs) in biological samples. Various parameters controlling SPME were studied: choice of SPME fiber, type and content of salt added, preheating and extraction time, desorption time, extraction temperature. Capillary gas chromatographic analysis with nitrogen phosphorus detection (GC-NPD) facilitates sensitive and selective detection of the OPPs: malathion, parathion, methyl parathion and diazinon. Fenitrothion was used as the internal standard. The method was applied to the determination of the pesticides in human biological specimens: whole blood, blood plasma, urine, cerebrospinal fluid, liver and kidney. Limits of detection ranged from 2 to 55 ng/ml depending on pesticide and type of specimen. The developed methodology overcomes limitations and obstacles of conventional methods such as the use of organic solvents, the formation of emulsions and the tedious-cumbersome procedures. The proposed protocol is seen as an attractive alternative to be used in routine toxicological analysis.
A rapid and sensitive method for the analysis of delta9-tetrahydrocannabinol (THC) in preserved oral fluid was developed and fully validated. Oral fluid was collected with the Intercept, a Food and Drug Administration (FDA) approved sampling device that is used on a large scale in the U.S. for workplace drug testing. The method comprised a simple liquid-liquid extraction with hexane, followed by liquid chromatography-tandem mass spectrometry (LC-MS-MS) analysis. Chromatographic separation was achieved using a XTerra MS C18 column, eluted isocratically with 1 mM ammonium formate-methanol (10:90, v/v). Selectivity of the method was achieved by a combination of retention time, and two precursor-product ion transitions. The use of the liquid-liquid extraction was demonstrated to be highly effective and led to significant decreases in the interferences present in the matrix. Validation of the method was performed using both 100 and 500 MicroL of oral fluid. The method was linear over the range investigated (0.5-100 ng/mL and 0. 1-10 ng/mL when 100 and 500 microL, respectively, of oral fluid were used) with an excellent intra-assay and inter-assay precision (relative standard deviations, RSD <6%) for quality control samples spiked at a concentration of 2.5 and 25 ng/mL and 0.5 and 2.5 ng/mL, respectively. Limits of quantification were 0.5 and 0.1 ng/mL when using 100 and 500 microL, respectively. In contrast to existing GC-MS methods, no extensive sample clean-up and time-consuming derivatisation steps were needed. The method was subsequently applied to Intercept samples collected at the roadside and collected during a controlled study with cannabis.