PubMed · 14201470
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
D W HILL. 1964. TEMPERATURE MEASUREMENT.. https://doi.org/10.1097/00004311-196408000-00014
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
A micro-X-ray diffraction (micro-XRD) technique has been employed to determine the phases in two superelastic nickel-titanium orthodontic wires that exhibit shape memory in the oral environment and one superelastic nickel-titanium wire that does not exhibit shape memory in vivo. The micro-XRD analyses were performed over the clinically relevant temperature range of 0-55 degrees C, which corresponds to the ingestion of cold and hot liquids, and both straight and bent (135 degrees ) test samples were analyzed. The results showed that for straight (as-received) test samples, the rhombohedral phase (R-phase) was definitely present in one shape memory wire product and perhaps in the other shape memory wire product, but was apparently absent in the superelastic wire product that did not display shape memory. Martensite was observed in all three wire products after bending. Phase transformations occurred with temperature changes simulating the oral environment for straight test samples of the two shape memory wires, but the micro-XRD pattern changed minimally with temperature for straight test samples of the superelastic wire and for bent test samples of all three wire products. The phase transformations revealed by micro-XRD were consistent with results recently found by temperature-modulated differential scanning calorimetry.
This paper introduces a simulation model for light and heat transport in tissues including perfusion effects. The model enables an efficient simulation of the damaged zone induced with an optical fibre for laser interstitial thermotherapy (LITT). It is designed specially for, but not limited to, tissue ablation in the neck region near to vessels. We describe in detail the effects of the rise in temperature caused by the absorption of light in tissue, using the heat equation and including the cooling effects of flow in vessels and of microperfusion in tissue in order to determine the extent of thermal damage. The extent of the necrosis zone is calculated with a damage function at each point of a finite element method (FEM) mesh. The FEM mesh is implemented with FEMLAB 2.3 as an add-on for finite element modelling for Matlab 6.5. LITT for tumour ablation in liver and some other anatomical regions is a well-known and established method (Bundesärztekammer und Kassenärztliche Bundesvereinigung 2002 Assessment der Bundesärztekammer und der Kassenärztlichen Bundesvereinigung, Köln). Investigations of treatments using LITT in the neck region are still in progress. We propose a refined model to validate the LITT method in the future in another anatomic region, e.g., in the highly sensitive region of the neck. Our calculations show that in order to induce a lesion with a maximum diameter of about 1 cm near to a large vessel, an application time between 3 and 4 min is needed using a laser power of about 10 W with a Nd:YAG 1064 nm radiation wavelength.
Explore the source record for details and available documents.