PubMed · 14322106
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
E D EANES. 1964. LOW-ANGLE X-RAY DIFFRACTION.. https://doi.org/10.1111/j.1365-2818.1964.tb00529.x
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
The effects of implant surface topography and chemistry on osteoblast behavior have been a research focus because of their potential importance in orthopedic and dental applications. This work focused on the topographic effects of hydroxyapatite (HA) and titanium (Ti) surface that had identical micropatterns to determine whether there was synergistic interaction between surface chemistry and surface topography. Surface microgrooves with six different groove widths (4, 8, 16, 24, 30, and 38 microm) and three different groove depths (2, 4, and 10 microm) were made on single crystalline silicon wafers using microfabrication techniques. Ti and HA thin films were coated on the microgrooves by radio-frequency magnetron sputtering. After that, human osteoblast-like cells were seeded and cultured on the microgrooved surfaces for up to 7 days. The cells' behavior was examined using scanning electron microscopy after cells were fixed and dehydrated. Statistical analysis was based on quantitative data of orientation angle, evaluating the contact guidance, and form index, describing cell shape or cell morphology changes. The contact guidance and cell shape changes were observed on the HA and Ti microgrooves. No difference in orientation angle between HA and Ti microgrooves was found. This might suggest that surface chemistry was not a significant influence on cell guidance. However, the form index analysis indicated an interaction between topographic effects and surface chemistry. Thus, conclusions about surface topographic effects on cell behavior drawn from one type of material cannot simply be applied to another type of material.
During clinical use of hydroxyapatite-coated implants, mechanical stresses are added to pre-existing residual stresses. The magnitude of these stresses affects the coating's performance. In this work we studied, by neutron diffraction and conventional X-ray diffraction methods, the macrostresses induced by a plasma-spraying process in the coating and at the interface. Neutron diffraction is one of the most suitable techniques for studying the strain distribution in a bulk material. X-ray diffraction was used to determine residual stress in the hydroxyapatite coating. Using a neutron diffraction method at the nearest point to the interface, we saw no real difference between the stress observed on coated and that on non-coated samples. With the X-ray diffraction method, it appeared that the stress level was compressive on every sample. The major advantage of the neutron diffraction method is that measurements can be made on a thick coating in a nondestructive way. The disadvantage is the large-gauge volume that we had to use because of the relatively low intensity of the neutron beam. Polishing is necessary for measurements inside the material when using the X-ray method. This destructive method may alter the stress field of the deposit.
Titanium surfaces were treated by exposing them to a beam of sodium ions. Sodium titanate was shown to be incorporated within the oxidic titanium surface. The ion-implanted surfaces were examined for their reactivity by immersion in a simulated body fluid, which showed the formation of surface-bound hydroxyapatite. The surface was characterized by X-ray diffraction, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and optical and electron microscopy. The surface hydroxyl concentration was determined using the nuclear reaction (1)H((15)N, alpha gamma)(12)C. Surface-related parameters that may affect hydroxyapatite nucleation are discussed in terms of the electrical double layer.