PubMed Health⌕ Search

PubMed · 1448426

Molecular weight changes in polymer erosion.

Abstract

We report a study of the effects of polymer molecular weight on the erosion of polyanhydride copolymer matrices composed of 1,3-bis(p-carboxyphenoxy)-propane (CPP) and sebacic acid (SA) in aqueous solution. The erosion profile characteristically displays an induction period during which the erosion rate is relatively slow. The length of this period depends on the initial molecular weight of the polymer. The induction period may be characterized as a time during which a rapid decrease in polymer molecular weight occurs, the end of this period correlating with the time required for the polymer molecular weight to decrease to below a value of approximately 5000 (MW).

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

A D'Emanuele, J Hill, J A Tamada, A J Domb, R Langer. 1992. Molecular weight changes in polymer erosion.. https://doi.org/10.1023/a%3A1015801216466

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Laser ablation inductively coupled plasma mass spectrometry assisted insight into ion-selective membranes.

Laser ablation inductively coupled plasma mass spectrometry was used to evaluate ion depth profiles across ion-selective membranes. Advantageously, this approach does not require incorporation of additional components (e.g., chromoionophore) in the membrane composition, as compared to that used in typical potentiometric applications. Moreover, comparison of the distribution of ions in differently pretreated membranes is possible. Concentration profiles of primary and interfering agent (Na+) ions were recorded, for example, of Pb2+-selective poly(vinyl chloride)-based membranes. It was found that the contents and the distribution of Pb(2+) and Na+ ions across the membrane is strongly dependent on the composition of the solutions to which both sides of the membrane are exposed during preconditioning and on the plasticizer included in the membrane formulation. Typical plasticizers, bis(2-ethylhexyl sebacate) (DOS) and the more polar 2-nitrophenyl octyl ether (o-NPOE), were used. It was found that faster ion transport occurs for o-NPOE, and the membrane saturation with Pb2+ ions was achieved within less than 20 h for a 400-microm-thick membrane. In the case of the less polar plasticizer DOS, due to slower rate of ion transport, even after 20 h, the Pb2+ concentration gradients were still visible within the membrane. On the basis of concentration profiles, primary ion diffusion coefficients in both membranes were calculated, and the value obtained for o-NPOE containing membrane was found to be approximately 2 times higher than for its DOS-plasticized counterpart.

Decanoic Acids↗

Novel copolyanhydrides combining strong inherent fluorescence and a wide range of biodegradability: synthesis, characterization and in vitro degradation.

In this work, a novel diacid monomer was synthesized in a very convenient scheme. The monomer is derived from naturally occurring products and emits strong fluorescence when polymerized to polyanhydride. The chemical structure of the monomer dCPS is as follows: HOC(O)ArOC(O)(CH2)2C(O)O--Ar--COOH. Copolyanhydrides composed of dCPS and sebacic acid were further prepared by melt copolycondensation, and characterized by IR, NMR, UV-Vis, DSC and fluorometry. The emission wavelength (lambda(em)) of the copolymers could be tuned by the excitation wavelength (lambda(ex)). Fluorescence intensity increased with the increase of dCPS content. The microspheres fabricated from the copolymer with dCPS content as low as 10% could be clearly visualized with fluorescence microscopy. Either blue or green images of the microspheres could be captured with an excitation of UV and visible light. The degradation rate of the copolyanhydrides decreased as the dCPS fraction increased, and the degradation duration could be modulated from several days to more than three months. In addition, it was found that the copolyanhydrides displayed surface degradation characteristics. In view of the advantages of the novel copolyanhydrides, such as easy preparation, unique inherent luminescent properties, and widely adjustable degradation rate, they might be useful for biomedical engineering.

Decanoic Acids↗