PubMed Health⌕ Search

PubMed · 14558201

Direct core materials.

Abstract

There are many materials that can be used for direct-placement cores. Although the scientific evidence is incomplete, some materials are better suited to this task than others. This article provides an overview of direct-placement core materials and highlights what clinicians should consider when assessing a new product.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Paul H Wilson, Nigel L Fisher, David W Bartlett. 2003. Direct core materials.. https://doi.org/10.12968/denu.2003.30.7.362

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Hydrolytic degradation and cracks in resin-modified glass-ionomer cements.

Water-absorption affects the basic properties of resin-modified glass-ionomer cements (RMGICs). Fick's law is usually invoked to explain the absorption process. The purpose of this study is to show that the absorption in accordance with the Fickian model cannot be extended to the whole of the specimen, and that microcrack formation is the main degradation mechanism for specimens cured in a closed environment. For this purpose, flat disk-shaped paste specimens 1.5 mm thick (aspect ratio 4), irradiated in closed conditions between two glass slides and stored in water for approximately 20 months, were analyzed periodically gravimetrically and under confocal fluorescence microscopy, with absorbed eosin used as the fluorescent probe. At pH 7.0, the specimen surface (10-20 micrometers in depth) absorbed water rapidly, swelled, and disintegrated in 20-40 days. Long-term storage produced isolated cracks and grains, no progress in the swelling, and a slow weight decrease. A lower pH (pH 3.5) produced a significant increase of the number of microcracks. The decrease in the irradiation time (30 s or less) enhanced the erosion process, producing very broad cracks. It was concluded that the prevalent mechanism of long-term hydrolytic degradation was based on the slow formation of cracks, whereas only in the early stage of storage did absorption occur quickly in accordance with the Fickian diffusion.

Composite Resins↗

Mechanical properties and three-body wear of veneering composites and their matrices.

Fatigue as one of the major factors affecting three-body wear of resin composites is influenced by mechanical properties of the resin matrix. The aim of this in vitro study was to determine three-body wear (ACTA methodology), fracture strength, and Young's modulus of four veneering composites (Artglass old and new formula, Vita Zeta LC Composite, Targis) and one direct restorative composite (Z 100). Furthermore, three-body wear of the pure matrices of the materials was tested. The wear results were compared to Amalgam as reference material. It should be computed whether there exists a correlation between the wear results of resin composite and matrix alone. Wear of the veneering composites was significantly higher than of Z100 (13 microm) and Amalgam (14 microm; p < 0.01, Mann-Whitney U-test). Mean fracture strengths of indirect composites ranged from 127.5 MPa (Targis) to 71.6 MPa (Vita Zeta LC). The elastic moduli of the composites were between 2.9 and 12.8 GPa. The matrix wear rates did not differ significantly. Three-body wear results of complex resin composites are highly influenced by their filler content, filler particle size distribution, kind of filler particles, shape, and their silanization to the matrix. Due to this fact, three-body wear testing is an essential testing method and cannot be replaced by testing single material components.

Composite Resins↗