PubMed Health⌕ Search
Home/Archive/PubMed

PubMed · 14610956

Effective normalization method for sample-position-dependence effect in photoacoustic spectrometry.

Jun Shen·Jianqin Zhou·Cheng Hu·Jianhua Zhao
View original source ↗Export metadata ↓

Abstract

Sample position dependence effect in photoacoustic (PA) spectrometry has been reported by several scientists. This effect must be taken into account in a PA application that requires a quantitative theoretical treatment. In this work, we experimentally investigated PA signal magnitude varying with sample-to-window distance in an MTEC Model 300 Photoacoustic Detector, which has a fixed empty (gas) volume in addition to the sample-to-window-distance-dependent gas volume. An operative method was introduced to obtain the coefficient, which considered the sample-to-window distance and the additional gas volume. With this coefficient, the one-dimensional PA model, developed by Aamodt, Murphy, and Parker, can be employed to quantitatively process PA experimental data, no matter what the sample-to-window distance is. Quantitative measurements of thermal effusivities of two samples were performed to prove this effective normalization method.

Explore related subjects

AcousticsAlgorithmsArtifactsCalibrationCarbonEquipment Failure AnalysisGraphiteLasersQuality ControlReproducibility of ResultsRubberSensitivity and SpecificitySpectrum AnalysisTemperatureComparative StudyEvaluation StudyJournal ArticleValidation Study

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Jun Shen, Jianqin Zhou, Cheng Hu, Jianhua Zhao. 2003. Effective normalization method for sample-position-dependence effect in photoacoustic spectrometry.. https://doi.org/10.1366/000370203321535105

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2007

Effects of gamma irradiation on mechanical properties of defatted trabecular bone allografts assessed by speed-of-sound measurement.

New sterilization methods for human bone allografts may lead to alterations in bone mechanical properties, which strongly influence short- and medium-term outcomes. In many sterilization procedures, bone allografts are subjected to gamma irradiation, usually with 25 KGy, after treatment and packaging. We used speed-of-sound (SOS) measurements to evaluate the effects of gamma irradiation on bone. All bone specimens were subjected to the same microbial inactivation procedure. They were then separated into three groups, of which one was treated and not irradiated and two were exposed to 10 and 25 KGy of gamma radiation, respectively. SOS was measured using high- and low-frequency ultrasound beams in each orthogonal direction. SOS and Young modulus were altered significantly in the three groups, compared to native untreated bone. Exposure to 10 or 25 KGy had no noticeable effect on the study variables. The impact of irradiation was small compared to the effects of physical or chemical defatting. Reducing the radiation dose used in everyday practice failed to improve graft mechanical properties in this study.

Acoustics↗
PubMed2007

Objective and subjective evaluation of the acoustic comfort in classrooms.

The acoustic comfort of classrooms in a Brazilian public school has been evaluated through interviews with 62 teachers and 464 pupils, measurements of background noise, reverberation time, and sound insulation. Acoustic measurements have revealed the poor acoustic quality of the classrooms. Results have shown that teachers and pupils consider the noise generated and the voice of the teacher in neighboring classrooms as the main sources of annoyance inside the classroom. Acoustic simulations resulted in the suggestion of placement of perforated plywood on the ceiling, for reduction in reverberation time and increase in the acoustic comfort of the classrooms.

Acoustics↗
PubMed2007

Analysis of effective radiating area, power, intensity, and field characteristics of ultrasound transducers.

OBJECTIVE: To characterize the ultrasound fields produced by a cohort of transducers from a single manufacturer via hydrophone and Schlieren technology. DESIGN: Descriptive study. SETTING: Measurement laboratory. PARTICIPANTS: Seven same-model ultrasound transducers from a single manufacturer. INTERVENTIONS: Not applicable. MAIN OUTCOME MEASURES: Effective radiating area (ERA), total power, spatial average intensity (SAI), beam nonuniformity ratio (BNR), and Schlieren beam widths at 1.0 and 3.3 MHz. RESULTS: Values for ERA (1.0 MHz range, 3.62-4.38 cm(2); 3.3 MHz range, 3.74-4.76 cm(2)), total power (1.0 MHz range, 5.0-5.6 W; 3.3 MHz range, 4.7-5.7 W), SAI (1.0 MHz range, 1.2-1.4 W/cm(2); 3.3 MHz range, 1.0-1.5 W/cm(2)), and BNR (1.0 MHz range, 2.79-5.85; 3.3 MHz range, 2.51-4.56) fell within manufacturer's specifications and U.S. Food and Drug Administration (FDA) regulations. Schlieren analysis showed significantly larger beam widths at 3.3 MHz compared with 1.0 MHz and a large degree of variability in the ultrasound fields generated by the different transducers. There were no significant correlations between beam widths and ERA values. CONCLUSIONS: ERA and total power values in a test cohort exist within a range that met FDA regulations. Individual variability in ERA and total power resulted in 50% variability in SAI. This variability may help explain previous reports of heating differences between transducers.

Acoustics↗