PubMed Health⌕ Search
Home/Archive/PubMed

PubMed · 14610961

Trace explosive detection in aqueous samples by solid-phase extraction ion mobility spectrometry (SPE-IMS).

Tricia L Buxton·Peter de B Harrington
View original source ↗Export metadata ↓

Abstract

Law enforcement agencies use ion mobility spectrometers for the detection of explosives, drugs of abuse, and chemical warfare agents. Ion mobility spectrometry (IMS) has the advantages of short analysis times, detections in the parts per billion concentrations, and high sensitivity. On-site environmental analysis of explosives or explosive residues in water is possible with ion mobility spectrometers. Unfortunately, the direct analysis of low levels of explosives in water is difficult. Extraction provides a method for pre-concentrating the analytes and removing interferents. Coupling solid-phase extraction (SPE) with IMS is useful for the identification of trace amounts of explosives in water. Commercially available SPE disks were used. After extraction, the sample disk is inserted into the ion mobility spectrometer, where the analytes are thermally desorbed from the disk. Concentrations as low as one part per trillion were detected with a Barringer Ionscan 350. An external computer and acquisition software (LabVIEW, National Instruments) were used to collect data. SIMPLISMA (SIMPLe-to-use-Interactive Self-modeling Mixture Analysis) was applied to the data to resolve features that vary with respect to time.

Explore related subjects

Aniline CompoundsAzocinesChromatographyExplosionsHeterocyclic Compounds, 1-RingMembranes, ArtificialMicrochemistryNitro CompoundsNitrobenzenesPhase TransitionReproducibility of ResultsSensitivity and SpecificitySoil PollutantsSolutionsSpectrum AnalysisTriazinesTrinitrotolueneUltrafiltrationWaterWater Pollutants, ChemicalComparative StudyEvaluation StudyJournal ArticleResearch Support, Non-U.S. Gov'tValidation Study

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Tricia L Buxton, Peter de B Harrington. 2003. Trace explosive detection in aqueous samples by solid-phase extraction ion mobility spectrometry (SPE-IMS).. https://doi.org/10.1366/000370203321535150

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2007

New hexamethine-hemicyanine dyes for the development of integrated optochemical sensors.

New far-visible absorbing anilino-cyanine dyes have been synthesised for future application as chromoionophores in integrated waveguide absorbance optodes based on bulk optodes. The effect of the heterocycle, of the substitution of the heterocyclic nitrogen and of the type of heptamethine central ring on the pKa values (4.3-8.2 in ethanol-water solutions and 9.5-11.0 in plasticised PVC membranes), on the spectroscopic characteristics of the dye and on photostability is discussed. pH-selective bulk optodes have been formulated as a first approach to develop ion-selective optodes, and sensitivity, repeatability, lifetime and response time have been determined. The dyes show good analytical behaviour for use as chromoionophores for the development of ion-selective optodes. Reversible (80-87%), fast (tr90%=0.94-2.28 min) and pH-sensitive membranes (slopes of 0.09-0.23 DeltaAbs.pHdec-1, absorbance range 0.19-0.53) have been obtained. Moreover, they exhibit good spectroscopic features for employment with integrated optochemical sensors: absorption maxima of the acidic species in plasticised PVC membranes matched those of 650-670-nm LEDs, high molar absorption coefficients (epsilonacidic=3.5x10(4)-9.3x10(4) L mol-1 cm-1 and epsilonbasic=1.9x10(4)-6.7x10(4) L mol-1 cm-1) and fluorescence.

Aniline Compounds↗
PubMed2007

A new simple method with high precision for determining the toxicity of antifouling paints on brine shrimp larvae (Artemia): first results.

The use of antifouling paints is the only truly effective method for the protection of underwater structures from the development of fouling organisms. In the present study, the surface to volume concept constitutes the basis for the development of a new and improved method for determining the toxicity of antifouling paints on marine organisms. Particular emphasis is placed on the attainment of a standardized uniformity of coated surfaces. Failure to control the thickness of the coat of paint in previous studies of this type, has led to inaccurate evaluation of the relative toxicity of samples. Herein, an attempt is made to solve this problem using a simple technique which gives completely uniform and smooth surfaces. The effectiveness of this technique is assessed through two series of experiments using two different types of test containers: 50 ml modified syringes and 7 ml multiwells. The results of the toxicity experiments follow a normal distribution around the average value which allows to consider these values as reliable for comparison of the level of toxic effect detected with the two types of test containers. The mean lethal concentration L(S/V)(50) in the test series conducted in the multiwells (20.38 mm(2)ml(-1)) does not differ significantly from that obtained in the test series using modified syringes (20.065 mm(2)ml(-1)). It can thus be concluded from this preliminary study that the new method and the two different ways of exposing the test organisms to the antifouling paints and their leachates gave reliable and replicable results.

Aniline Compounds↗
PubMed2007

Doping nanoparticles into polymers and ceramics using ultrasound radiation.

In materials science, sonochemistry is mostly used for the fabrication of nanomaterials, but it has also been used for the polymerization of monomers. The current review is aimed at introducing a new application of sonochemistry to materials science, i.e., the doping of nanoparticles into polymers and ceramic bodies. The introduction will present a short overview of sonochemistry, and will outline the advantages of sonochemistry as a tool for fabricating nanomaterials.

Aniline Compounds↗