Pollution-preventing anionic lithographic inks.

Chandrakant S Maji; Ashok N Bhaskarwar

doi:10.1016/j.jhazmat.2003.07.007

Home/Archive/PubMed

PubMed · 14623422

Pollution-preventing anionic lithographic inks.

Chandrakant S Maji·Ashok N Bhaskarwar

View original source ↗Export metadata ↓

Abstract

Lithographic printing presses use aliphatic and aromatic solvents for cleaning various surfaces, which are coated with the ink. The conventional printing inks also contain volatile solvents. During printing and cleaning operations, volatile organic compounds (VOCs) present in the inks and cleaning solvents are lost to the atmosphere by evaporation and these losses are quantifiable and alarmingly high. A new type of ink based on castor oil, which completely eliminates emissions of VOCs, has been developed. Synthesis of resins and the kinetics of washing of the ink, similar to the recently announced pollution-preventing ink [development of a VOC-free lithographic printing system. TAGA Proc., 324], with water at a slightly elevated pH are studied. A correlation between the mass-transfer coefficient characterizing the washing of ink and the experimental process variables is confirmed. New data are also reported on flake-formation dynamics.

Explore related subjects

Air Pollutants, Occupational Air Pollution Castor Oil Diffusion Ink Occupational Exposure Printing Solvents Volatilization Journal Article

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Chandrakant S Maji, Ashok N Bhaskarwar. 2003-12-12. Pollution-preventing anionic lithographic inks.. https://doi.org/10.1016/j.jhazmat.2003.07.007

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2004

Urinary 1-hydroxypyrene and polycyclic aromatic hydrocarbon exposure among asphalt paving workers.

OBJECTIVES: Using urinary 1-hydroxypyrene (1-OHP) as a measure of total absorbed dose, the primary objective of this study was to evaluate the total effect of inhalation and dermal PAH exposures while considering other factors such as age, body mass index and smoking that may also have a significant effect on urinary 1-OHP. METHODS: The study population included two groups of highway construction workers: 20 paving workers and 6 milling workers. During multiple consecutive workshifts, personal air and dermal samples were collected from each worker and analyzed for pyrene. During the same work week, urine samples were collected pre-shift, post-shift and at bedtime each day and analyzed for 1-OHP. Distributed lag models were used to evaluate the independent effect of inhalation and dermal exposures that occurred at each of several preceding exposure periods and were used to identify the relevant period of influence for each pathway. RESULTS: The paving workers had inhalation (mean 0.3 micro g/m(3)) and dermal (5.7 ng/cm(2)) exposures to pyrene that were significantly higher than the milling workers. At pre-shift on Monday morning, following a weekend away from work, the pavers and millers had the same mean baseline urinary 1-OHP level of 0.4 micro g/g creatinine. The mean urinary 1-OHP levels among pavers increased significantly from pre-shift to post-shift during each work day, while the mean urinary 1-OHP levels among millers varied little and remained near the baseline level throughout the study period. Among pavers there was a clear increase in the pre-shift data during the work week, such that the average pre-shift level on day 4 (1.4 micro g/g creatinine) was 3.5 times higher than the average pre-shift results on day 1 (0.4 micro g/g creatinine). The results of the distributed lag model indicated that the impact of dermal exposure was approximately eight times the impact of inhalation exposure. Furthermore, dermal exposure that occurred during the preceding 32 h had a statistically significant effect on urinary 1-OHP, while the effect of inhalation exposure was not significant. CONCLUSIONS: We found that distributed lag models are a valuable tool for analyzing longitudinal biomarker data and our results indicate that dermal contact is the primary route of exposure to PAHs among asphalt paving workers. An exposure assessment of PAHs that does not consider dermal exposure may considerably underestimate cumulative exposure and control strategies aimed at reducing occupational exposure to asphalt-related PAHs should include an effort to reduce dermal exposure.

Air Pollutants, Occupational↗

PubMed2004

Evaluating exposures to complex mixtures of chemicals during a new production process in the plastics industry.

The goal of this study was to monitor emission of chemicals at a factory where plastics products were fabricated by a new robotic (impregnated tape winding) production process. Stationary and personal air measurements were taken to determine which chemicals were released and at what concentrations. Principal component analyses (PCA) and linear regression were used to determine the emission sources of different chemicals found in the air samples. We showed that complex mixtures of chemicals were released, but most concentrations were below Dutch exposure limits. Based on the results of the principal component analyses, the chemicals found were divided into three groups. The first group consisted of short chain aliphatic hydrocarbons (C2-C6). The second group included larger hydrocarbons (C9-C11) and some cyclic hydrocarbons. The third group contained all aromatic and two aliphatic hydrocarbons. Regression analyses showed that emission of the first group of chemicals was associated with cleaning activities and the use of epoxy resins. The second and third group showed strong association with the type of tape used in the new tape winding process. High levels of CO and HCN (above exposure limits) were measured on one occasion when a different brand of impregnated polypropylene sulphide tape was used in the tape winding process. Plans exist to drastically increase production with the new tape winding process. This will cause exposure levels to rise and therefore further control measures should be installed to reduce release of these chemicals.

Air Pollutants, Occupational↗

PubMed2004

DNA single strand breaks in peripheral lymphocytes associated with urinary thiodiglycolic acid levels in polyvinyl chloride workers.

The association between vinyl chloride monomer (VCM) exposure and DNA damage has been established. However, the relationship between individual exposure and DNA single strand breaks was limited. Since environmental monitoring may not reflect the actual exposure, a useful marker of exposure is needed to assess the individual exposure. In our previous study, we have found a high correlation between air VCM level and urinary thiodiglycolic acid (TdGA) at the commencement of the next shift. Here, we further used comet assay to evaluate the relationship between urinary TdGA levels and DNA single strand breaks in polyvinyl chloride monomer (PVC) workers. Urinary TdGA levels (n=26) at the commencement of the following shift were analyzed. Ten of the 26 workers also had personal air sampling for air VCM exposure. Questionnaires were administered to obtain epidemiological information including detailed history of occupation and lifestyles. Workers experiencing air VCM level greater than 5 ppm had higher tail moment and tail intensity (%) than those experiencing VCM exposure between 1 and 5, or <1 ppm, respectively (P < 0.05). The results also revealed that level of DNA single strand breaks, including tail moment and tail intensity, were increased with urinary TdGA level. The dose-response relationship of urinary TdGA level and DNA single strand breaks was particularly significant among the workers with 4 mg/g Cr of urinary TdGA level, which is equivalent to 5 ppm air VCM level. We concluded that air VCM exposure greater than 5 ppm could induce DNA damage. Further sensitive assay should be developed for the diction of DNA damage when air VCM exposure below 5 ppm.

Air Pollutants, Occupational↗