PubMed Health⌕ Search
Home/Archive/PubMed

PubMed · 14715025

Galactose-substituted alginate 2: conformational aspects.

Ivan Donati·Anna Coslovi·Amelia Gamini·Gudmund Skjåk-Braek·Amedeo Vetere·Cristiana Campa·Sergio Paoletti
View original source ↗Export metadata ↓

Abstract

Galactose moieties have been introduced on the uronic groups of alginates from different sources via an N-glycosidic bond, thus affecting the net charge on the polymer chain. The modified polymers have been analyzed by means of viscosity and of high-performance size-exclusion chromatography combined with refractive index multiple angle laser light scattering (HPSEC-RI-MALLS) measurements. The latter technique enabled us to determine the molecular weight of the modified polymers, proving that the synthetic procedure did not affect the chemical integrity of the chain. The intrinsic viscosity and the radius of gyration data showed that the hydrodynamic properties of the polymer chain varied with the degree and the pattern of substitution. In the presence of a relatively low galactose content (up to 19%), a decrease of the hydrodynamic dimensions of the coil was experienced, while on increasing the degree of substitution (especially on GG diads) a re-extension of the chain was discovered. Measurements of intrinsic viscosity at different values of the degree of dissociation have demonstrated that this effect cannot be solely explained by the reduction of the charge density of the polymer. Rather, it implies the occurrence of conformational changes of the chain that are specific to the chemical nature of the site of substitution. These data have been supported by the values of the persistence length of the natural and modified polymers obtained with the Doty-Benoit equation. The chiro-optical properties of the modified polymers studied by means of circular dichroism (CD) spectroscopy confirmed that conformational variations occurred to the polymeric chain upon introduction of galactose residues.

Explore related subjects

AlginatesCarbohydrate ConformationGalactoseGlucuronic AcidHexuronic AcidsOptical RotationViscosityJournal ArticleResearch Support, Non-U.S. Gov't

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Ivan Donati, Anna Coslovi, Amelia Gamini, Gudmund Skjåk-Braek, Amedeo Vetere, Cristiana Campa, Sergio Paoletti. Galactose-substituted alginate 2: conformational aspects.. https://doi.org/10.1021/bm030063k

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2007

Protein engineering of Acidovorax facilis 72W nitrilase for bioprocess development.

Hydroxycarboxylic acid monomers can be used to prepare industrially important polymers. Enzymatic production of such hydroxycarboxylic acids is often preferred to chemical production since the reactions are run at ambient temperature, do not require strongly acidic or basic reaction conditions, and produce the desired product with high selectivity at high conversion. However, native enzymes often do not perform desired reactions with the efficiency required for commercial applications. Protein engineering was used to significantly increase the specific activity of nitrilase from Acidovorax facilis 72W for the conversion of 3-hydroxyvaleronitrile to 3-hydroxyvaleric acid. Overexpression of engineered nitrilase enzymes in Escherichia coli, combined with immobilization of whole cells in alginate beads that can be recycled many times has facilitated the development of a commercially viable bioprocess for production of 3-hydroxyvaleric acid.

Alginates↗
PubMed2007

Zeta-potentials of alginate-PLL capsules: a predictive measure for biocompatibility?

Alginate-poly-L-lysine (PLL) microencapsulation of cells is a promising approach to prevent rejection in the absence of immunosuppression. Clinical application, however, is hampered by insufficient insight in factors influencing biocompatibility of the capsules. By now, it has been accepted that not only the chemical composition of the materials applied but also other factors contribute to bioincompatibility. The zeta-potential serves as a measure for the electrical charge of the surface and has been shown to be a predictive value for the interfacial reactions between the biomaterial and the surrounding tissue in other applications. In the present study, we have assessed the streaming potential of alginate-PLL capsules composed of either low-, intermediate-, or high-guluronic (G) alginate to calculate the zeta-potential. The zeta-potentials of the capsules were compared to the biological response against the capsules at 4 weeks after implantation in the rat. We show that high-G and low-G alginates provoke a more severe response in the rat than capsules prepared of intermediate-G alginate. This correlates with a higher zeta-potential of the high-G and low-G alginates and by a change in zeta-potential at lower pH. These lower pH-levels are common directly after implantation as the consequence of a host-response associated with mandatory surgery. Our results suggest that we should not only consider the capsule properties under physiological circumstances to explain bioincompatibility but also the capsule features during common pathophysiological situations.

Alginates↗
PubMed2007

Effect of immersion disinfection with Perform-ID on alginate, an alginate alternative, an addition-cured silicone and resultant type III gypsum casts.

OBJECTIVE: This study investigated the effect of a commonly used immersion disinfectant upon three different impression materials and any subsequent effects on the abrasion resistance, hardness and surface detail reproduction of gypsum casts. DESIGN: A laboratory study. MATERIALS AND METHODS: Under standardised conditions a total of 120 impressions were made of a ruled test block using irreversible hydrocolloid (Alginoplast), an 'alginate alternative' addition-cure silicone (Position Penta) and a conventional addition-cure silicone (President). The impressions were examined for surface detail reproduction prior to and after disinfection with Perform-ID. The type III casts were evaluated for surface detail reproduction, surface hardness and abrasion resistance. RESULTS: (1) None of the disinfected alginate specimens could reproduce the 50 microm line. (2) Casts produced from the disinfected alginate were significantly less hard than from disinfected Position Penta and President (P <0.001). (3) Disinfection significantly affected the abrasion resistance of casts made from Position Penta (P = 0.029). (4) Disinfection did not significantly affect President or its subsequent casts (P >0.05). CONCLUSION: If disinfecting with Perform-ID, the impression should be made with a conventional addition-cured silicone if good surface detail reproduction of the impression material and a hard and abrasion resistant type III gypsum cast are required.

Alginates↗