PubMed Health⌕ Search
Home/Archive/PubMed

PubMed · 14745761

A method for preamplifier-decoupling improvement in quadrature phased-array coils.

Ceylan Celil Guclu·Ed Boskamp·Tsinghua Zheng·Ricardo Becerra·LeRoy Blawat
View original source ↗Export metadata ↓

Abstract

PURPOSE: To improve preamplifier decoupling in a quadrature phased-array coil using a new quadrature combiner configuration. MATERIALS AND METHODS: A commercial six-element quadrature cervical-thoracic-lumbar (CTL) coil was used on a 1.5 T GE Signa Lx Scanner. The new combiner configuration is designed based on the fact that when one compares the amount of flux linkage of two loops with butterfly elements separated by the same distance, the loop elements have much higher coupling than the butterfly elements. RESULTS: The results are demonstrated using an imaging-based element coupling measurement method. The new quadrature combiner configuration has introduced an approximately -8dB improvement in preamplifier decoupling. CONCLUSION: One-dimensional quadrature phased arrays can be built even if the preamplifier is not integrated in the coil. If the combiner is placed between the coil and the preamplifiers, the butterflies should be on the high impedance side of the quadrature combiner. The loops should see the low input impedance of the preamplifiers.

Explore related subjects

Amplifiers, ElectronicEquipment DesignImage EnhancementMagnetic Resonance ImagingJournal Article

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Ceylan Celil Guclu, Ed Boskamp, Tsinghua Zheng, Ricardo Becerra, LeRoy Blawat. 2004. A method for preamplifier-decoupling improvement in quadrature phased-array coils.. https://doi.org/10.1002/jmri.10449

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2006

A biopolymer transistor: electrical amplification by microtubules.

Microtubules (MTs) are important cytoskeletal structures engaged in a number of specific cellular activities, including vesicular traffic, cell cyto-architecture and motility, cell division, and information processing within neuronal processes. MTs have also been implicated in higher neuronal functions, including memory and the emergence of "consciousness". How MTs handle and process electrical information, however, is heretofore unknown. Here we show new electrodynamic properties of MTs. Isolated, taxol-stabilized MTs behave as biomolecular transistors capable of amplifying electrical information. Electrical amplification by MTs can lead to the enhancement of dynamic information, and processivity in neurons can be conceptualized as an "ionic-based" transistor, which may affect, among other known functions, neuronal computational capabilities.

Amplifiers, Electronic↗
PubMed2006

Numerical study of wavelength-swept semiconductor ring lasers: the role of refractive-index nonlinearities in semiconductor optical amplifiers and implications for biomedical imaging applications.

Recent results have demonstrated unprecedented wavelength-tuning speed and repetition rate performance of semiconductor ring lasers incorporating scanning filters. However, several unique operational characteristics of these lasers have not been adequately explained, and the lack of an accurate model has hindered optimization. We numerically investigated the characteristics of these sources, using a semiconductor optical amplifier (SOA) traveling-wave Langevin model, and found good agreement with experimental measurements. In particular, we explored the role of the SOA refractive-index nonlinearities in determining the intracavity frequency-shift-broadening and the emitted power dependence on scan speed and direction. Our model predicts both continuous-wave and pulse operation and shows a universal relationship between the output power of lasers that have different cavity lengths and the filter peak frequency shift per round trip, therefore revealing the advantage of short cavities for high-speed biomedical imaging.

Amplifiers, Electronic↗
PubMed2006

Influence of recording instrumentation on the stimulus artifact tail in the surface acquisition of somatosensory evoked potentials.

Surface recorded somatosensory evoked potentials (SEPs) are neural signals elicited by an external stimulus. In the case of electrically induced SEPs, the artifact generated by the stimulation process can severely distort the signal. The artifact is characterized by a large impulse followed by a slowly decaying tail. In some cases, the artifact tail often lasts well into the initiation of the SEP making the determination of absolute latency very difficult. While the literature often states that the recording instrumentation plays a part in the generation of this artifact tail, no firm evidence has ever been presented. In this work, comparisons are made between three instrumentation systems (BJT, JFET and CMOS) with differing input impedances in an attempt to quantify the effects on the artifact tail. The conclusions from this investigation show that there is no significant interaction between the input impedance of the recording instrumentation and the duration of the artifact tail. Each amplifier type produced results with no significant statistical differences. It was also found that while stimulation amplitude has a weak effect on the artifact tail, the greatest contribution to variation has an inter-subject origin. Consequently, it is concluded that the time constant of the artifact tail must originate from other sources that are subject dependent.

Amplifiers, Electronic↗