PubMed · 14782313
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
W G BRANDSTADT. 1950. Air pollution.. https://pubmed.ncbi.nlm.nih.gov/14782313/
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
The growing implementation of exhaust gas recirculation (EGR) in reducing NO(x) emissions of engine is of paramount motivation to perform a fundamental research on the flammability characteristics of fuel-air-diluent mixtures. In this work, the influences of EGR on the flammability region of natural gas-air-diluent flames were experimentally studied in a constant volume bomb. An assumption of critical burning velocity at flammability limit is proposed to approximately determine the flammability region of these mixtures. Based on this assumption, an estimation of the flammability map for natural gas-air-diluent mixtures was obtained by using the empirical formula of burning velocity data. The flammability regions of natural gas-air mixtures with EGR are plotted versus the EGR rate. From the comparison of estimated results and experimental measurements, it is suggested that the accuracy of prediction is largely dependent upon the formula of burning velocity used. Meanwhile, the influence of pressure on the critical burning velocity at flammability limit is also investigated. On the basis of the pressure dependence criterion, the estimation was performed for the circumstance of high temperature and pressure, and the prediction results still agree well with those of experiments.
TiO(2) photocatalysis with ultraviolet (UV-A) light has proven to be a highly effective process for complete inactivation of airborne microbes. However, the overall efficiency of the technology needs to be improved to make it more attractive as a defense against bio-terrorism. The present research investigates the enhancement in the rate of destruction of bacterial spores on metal (aluminum) and fabric (polyester) substrates with metal (silver)-doped titanium dioxide and compares it to conventional photocatalysis (TiO(2) P25/+UV-A) and UV-A photolysis. Bacillus cereus bacterial spores were used as an index to demonstrate the enhanced disinfection efficiency. The results indicate complete inactivation of B. cereus spores with the enhanced photocatalyst. The enhanced spore destruction rate may be attributed to the highly oxidizing radicals generated by the doped TiO(2).
Tribological properties of materials used in biomedical implants critically affect the performance of the implant. A UHMWPE cup paired with a ceramic ball is a popular combination for implants due to its relatively low wear rate. In this study we investigate the effect of surface roughness of UHMWPE on the friction behavior and onset of wear in a UHMWPE/silicon nitride interface in both dry air and bovine serum environments. Microscale multi-asperity contact is examined using a ball-on-flat reciprocating microtribometer. Nanoscale single-asperity contact and surface topography are examined using atomic force microscopy. Friction was found to increase with a decrease in surface roughness of the UHMWPE sample in air, which is due to an increase in real area of contact. This trend was seen to disappear or even reverse in serum. This is due to an increase in the interfacial shear stress of the UHMWPE surface when exposed to the serum. This increase is believed to be caused by an adhered layer of protein on the UHMWPE surface.