PubMed Health⌕ Search
Home/Archive/PubMed

PubMed · 15009690

Microstructural and microtextural characterization of oxide scale on steel using electron backscatter diffraction.

S Birosca·D Dingley·R L Higginson
View original source ↗Export metadata ↓

Abstract

High-temperature oxidation of steel has been extensively studied. The microstructure of iron oxides is, however, not well understood because of the difficulty in imaging it using conventional methods, such as optical or electron microscopy. A knowledge of the oxide microstructure and texture is critical in understanding how the oxide film behaves during high-temperature deformation of steels and more importantly how it can be removed following processing. Recently, electron back-scatter diffraction (EBSD) has proved to be a powerful technique for distinguishing the different phases in scales. This technique gives valuable information both on the microstructure and on the orientation relationships between the steel and the scale layers. In the current study EBSD has been used to investigate the microstructure and microtexture of iron oxide layers grown on interstitial free steel at different times and temperatures. Heat treatments have been carried out under normal oxidation conditions in order to relate the results to real steel manufacturing in industry. The composition, morphologies, microstructure and microtexture of selected conditions have been studied using EBSD.

Explore related subjects

Ferric CompoundsMicroscopy, ElectronOxidation-ReductionSpectrum AnalysisSteelTemperatureTime FactorsJournal Article

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

S Birosca, D Dingley, R L Higginson. 2004. Microstructural and microtextural characterization of oxide scale on steel using electron backscatter diffraction.. https://doi.org/10.1111/j.0022-2720.2004.01320.x

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2006

Characterization and surface reactivity of ferrihydrite nanoparticles assembled in ferritin.

Ferrihydrite nanoparticles with nominal sizes of 3 and 6 nm were assembled within ferritin, an iron storage protein. The crystallinity and structure of the nanoparticles (after removal of the protein shell) were evaluated by high-resolution transmission electron microscopy (HRTEM), atomic force microscopy (AFM), and scanning tunneling microscopy (STM). HRTEM showed that amorphous and crystalline nanoparticles were copresent, and the degree of crystallinity improved with increasing size of the particles. The dominant phase of the crystalline nanoparticles was ferrihydrite. Morphology and electronic structure of the nanoparticles were characterized by AFM and STM. Scanning tunneling spectroscopy (STS) measurements suggested that the band gap associated with the 6 nm particles was larger than the band gap associated with the 3 nm particles. Interaction of SO2(g) with the nanoparticles was investigated by attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy, and results were interpreted with the aid of molecular orbital/density functional theory (MO/DFT) frequency calculations. Reaction of SO2(g) with the nanoparticles resulted primarily in SO(3)2- surface species. The concentration of SO3(2-) appeared to be dependent on the ferrihydrite particle size (or differences in structural properties).

Ferric Compounds↗
PubMed2006

When being straight bends rules: a rationale for the linear FeNO unit in the low-spin square-pyramidal {FeNO}7 tetracyanonitrosylferrate(2-) anion.

All low-spin S=1/2 heme-NO complexes feature FeNO angles of about 140 degrees . In contrast, the square-pyramidal [Fe(CN)(4)(NO)](2-) complex features an exactly linear {FeNO}(7) unit. We have sought here to determine a possible, simple molecular orbital (MO) rationale for these structural variations. A DFT-based (DFT=density functional theory) MO analysis shows that the linearity of the latter stems from the greater pyramidalization of the Fe center, relative to nitrosylheme, which results in significant differences in d orbital hybridization. Thus, the singly occupied molecular orbital (SOMO) of [Fe(CN)(4)(NO)](2-) , while primarily Fe dz2-based, also has a significant amount of 4p(z) character, which makes it less stereochemically active, accounting for the linearity of the FeNO unit.

Ferric Compounds↗
PubMed2006

Confocal laser microspectroscopic Rabi-flopping study of an iron oxide emitter surface used for Rydberg matter generation.

Rydberg matter (RM) is a novel metal-like material in the form of electronically excited clusters of atoms (e.g. K and H) or molecules (e.g. H(2)). It is used as the inverted laser medium for IR in the RM laser. RM has recently been formed in its lowest state, which is proposed to be metallic hydrogen [Energy and Fuels 19 (2005) 2235]. An emitter material (K-doped iron oxide catalyst) that forms RM is studied by a specialized spectroscopic method, needed to detect the Rydberg states on the emitter surface. The spectroscopic method is phase-delay Rabi-flopping; it gives spectra from the time delay due to the periodic motion of the optical nutation vector. The formation of Rydberg species in the form of complexes K*-M (M a general small molecule) and (K-M)* is studied. So-called avoided transitions in K(+) ions are detected, of the same type as observed as transitions in the RM laser by stimulated emission. The formation and detection of Rydberg complexes containing H and H(2) is of great interest for metallic hydrogen production. Complexes with M=CH(2), H(2)O (or OH), CHO, H(2) and M'H are observed. Avoided transitions in RM clusters K(N)(*) are also identified. The identification of H containing Rydberg complexes on the surface indicates that metallic hydrogen is formed by the same cluster desorption route as other RM clusters.

Ferric Compounds↗