PubMed Health⌕ Search
Home/Archive/PubMed

PubMed · 15018967

A novel method to construct a third-generation biosensor: self-assembling gold nanoparticles on thiol-functionalized poly(styrene-co-acrylic acid) nanospheres.

Shiyi Xu·Xiaozu Han
View original source ↗Export metadata ↓

Abstract

A novel method for fabrication of horseradish peroxidase (HRP) biosensor has been developed by self-assembling gold nanoparticles on thiol-functionalized poly(styrene-co-acrylic acid) (St-co-AA) nanospheres. At first, a cleaned gold electrode was immersed in thiol-functionalized poly(St-co-AA) nanosphere latex prepared by emulsifier-free emulsion polymerization of St with AA and function with dithioglycol to assemble the nanospheres, then gold nanoparticles were chemisorbed onto the thiol groups. Finally, horseradish peroxidase was immobilized on the surface of the gold nanoparticles. The sensor displayed an excellent electrocatalytical response to reduction of H2O2 without the aid of an electron mediator. The sensor was highly sensitive to hydrogen peroxide with a detection limit of 4.0 micromoll(-1), and the linear range was from 10.0 micromoll(-1) to 7.0 mmoll(-1). The biosensor retained more than 97.8% of its original activity after 60 days of use. Moreover, the studied biosensor exhibited good current repeatability and good fabrication reproducibility.

Explore related subjects

Acrylic ResinsBiosensing TechniquesGoldHorseradish PeroxidaseHydrogen PeroxideMicroscopy, ElectronNanotechnologyNanotubesPolystyrenesJournal Article

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Shiyi Xu, Xiaozu Han. 2004-04-15. A novel method to construct a third-generation biosensor: self-assembling gold nanoparticles on thiol-functionalized poly(styrene-co-acrylic acid) nanospheres.. https://doi.org/10.1016/j.bios.2003.09.007

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2005

Poly (acrylic acid) chitosan interpolymer complexes for stomach controlled antibiotic delivery.

The aim of this study was to develop a stomach-specific drug delivery system to increase the efficacy of amoxicillin against Helicobacter pylori. Polyacrylic acid (PAA), chitosan (CS), and amoxicillin (A) were employed to obtain polyionic complexes. The design of the hydrogel delivery system was based on the swellable approach; with a floating feature to prolong the Gastric Residence Time (GRT). The polyionic complex (PAA:CS:A 2.5:5:2) showed a sustained drug release profile in enzyme-free simulated gastric fluid (SGF) and pH 4.0. A pH independent swelling-eroding pattern with adequate maximum swelling ratios of 17.76 and 13.42 was obtained at in SGF and pH 4.0, respectively, with similar eroding profiles in both pH media. This network carrier provides an amoxicillin protective effect towards the hydrolytic degradation in SGF. The in vivo study was performed on healthy volunteers, using the [13C] octanoic acid breath test. The proposed hydrogel showed a prolonged GRT of up to 3 h. The preliminary results from this study suggest that amoxicillin polyionic complexes have potential for improving local antibiotic therapy against H. pylori.

Acrylic Resins↗
PubMed2005

Poly(N-isopropylacrylamide) copolymer films as vehicles for the sustained delivery of proteins to vascular endothelial cells.

The aim of this study was to establish the capacity of thermoresponsive poly(N-isopropylacrylamide) copolymer films to deliver bioactive concentrations of vascular endothelial growth factor (VEGF165) to human aortic endothelial cells (HAEC) over an extended time period. Films were prepared using a 50:50 (w/w) mixture of non-crosslinkable and crosslinkable copolymers of the following monomer compositions (w/w): 85:15, N-isopropylacrylamide (NiPAAm):N-tert-butylacrylamide (NtBAAm); and 85:13:2 NiPAAm:NtBAAm:acrylamidobenzophenone (ABzPh, crosslinking agent), respectively. After crosslinking by UV irradiation, the ability of films to incorporate a fluorescently labeled carrier protein (FITC-labeled BSA, 1 mg loaded per film), at 4 degrees C, was first established. Incorporation into the matrix was confirmed by the observation that increasing film thickness from 5 to 10 microm increased release from collapsed films at 37 degrees C (1.76 +/- 0.15 and 10.98 +/- 3.38 microg/mL, respectively, at 24 h postloading) and that this difference was maintained at 5 days postloading (1.81 +/- 0.25 and 13.8 +/- 2.3 microg/mL, respectively). Incorporation was also confirmed by visualization using confocal microscopy. When 10-microm films were loaded with a BSA solution (1 mg/mL) containing VEGF165 (3 microg/mL), sustained release of VEGF165 was observed (10.75 +/- 3.11 ng at 24 h; a total of 31.32 +/- 8.50 ng over 7 days). Furthermore, eluted VEGF165 increased HAEC proliferation by 18.2% over control. The absence of cytotoxic species in medium released from the copolymer films was confirmed by the lack of effect of medium (incubated with copolymer films for 3 days) on HAEC viability. In conclusion this study has shown that NiPAAm:NtBAAm copolymers can be loaded with a therapeutic protein and can deliver bioactive concentrations to human vascular endothelial cells over an extended time period.

Acrylic Resins↗
PubMed2005

Glucose permeable poly (dimethyl siloxane) poly (N-isopropyl acrylamide) interpenetrating networks as ophthalmic biomaterials.

Poly (dimethyl siloxane) (PDMS) has been widely used as a biomaterial in ophthalmic and other applications due to its good compatibility, high mechanical strength, excellent oxygen permeability and transparency. However, for use as an artificial cornea, contact lens and in other applications, modifications with hydrophilic functional groups or polymers are necessary to improve wettability for tear protein and mucin interactions and to improve glucose permeability for cellular health. Poly (N-isopropyl acrylamide) (PNIPAAM) is a biocompatible and hydrophilic polymer that has been extensively studied on controlled drug release applications due to its lower critical solution temperature (LCST) phenomenon. In the current work, a composite interpenetrating network (IPN) of PDMS and PNIPAAM was formed to generate polymers with oxygen and glucose permeability as well as improved wettability compared to PDMS homopolymers and greater mechanical strength than PNIPAAM homopolymers. Transparent vinyl and hydroxyl terminated PDMS/PNIPAAM IPNs (PDMS-V and PDMS-OH IPNs, respectively) were successfully synthesized. Transmission electron microscopy images verified the structure of the IPNs. Surface analysis suggested that PNIPAAM was present on the surface as well as in the bulk material. PDMS-OH IPNs generated from a PDMS-OH matrix cured in the presence of solvent had the highest glucose permeability at 10(-7)cm2/s, comparable to that of the native cornea. The LCST phenomenon remained in these materials, although changes were not as abrupt as with pure PNIPAAM. These results suggest that these materials may be further developed as ophthalmic biomaterials or for controlled drug-release applications.

Acrylic Resins↗