PubMed Health⌕ Search

PubMed · 15081127

Interventional spinal procedures.

Abstract

The interventional procedures for disk herniation and protrusion by percutaneous techniques are decompressive such as chemodiscolysis with chimopapain, nucleo-discectomy introduced by Onik, LASER discectomy, and recently nucleoplasty, and decompressive and direct antinflammatory such as chemiodiscolysis with an Oxygen-ozone mixture. These techniques have minimized the invasive nature of surgery and avoid or decrease complications like infection linked to surgery. Reducing intervertebral disc size by mechanical aspiration of a part of the disc or partially dissolving the herniation by drying reduces the conic pressure on the torn annulus and creates the space necessary for retropulsion whenever the circular fibres of the annulus regain a minimum capacity to contain the disc under tension. The proposed suggestion in these techniques is that a small change in volume produces large change in pressure. The success rates reported in different studies vary from 65 to 80% of excellent or good results with chemonucleolysis and aspiration. Vertebroplasty (VP) is done by percutaneous injection of acrylic cement (polymethylmetacrylate-PMMA) into the vertebrae under fluoroscopic and/or CT control to achieve an antalgic effect and stabilize the vertebral body. VP has been used for vertebral collapses caused by osteoporosis, long-term steroid treatment, aggressive symptomatic angiomas and lytic metastasis. The reported figures in literature are 80-95% of pain relief, within 7 days after procedure, commonly on the same day.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Cosma Andreula, Mario Muto, Marco Leonardi. 2004. Interventional spinal procedures.. https://doi.org/10.1016/j.ejrad.2003.10.013

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Gamma-radiation-induced changes in structure and properties of tetracalcium phosphate and its derived calcium phosphate cement.

The purpose of the present study was to investigate the gamma-radiation effect on the structure and properties of the single-phase tetracalcium phosphate (TTCP) powder and its derived calcium phosphate cement (CPC). Experimental results show that low-dosed (0-30 kGy) CPC has a setting time of 10-12 min, while high-dosed (40-120 kGy) CPC has a setting time of 8-10 min. The low dose gamma-radiation does not significantly change porosity volume fraction or compressive strength of the CPC. The pH values of all CPC samples fell in a relatively narrow band, with a band width of 8.5-9.1 (in terms of pH value). With a dose of 10 or 20 kGy gamma-radiation, the TTCP-apatite conversion ratio does not change much. With 30 kGy the conversion ratio significantly increases and reaches a maximum value. With further increases in dose, the conversion ratio quickly declines. With increasing gamma-ray dose, the CPC morphology becomes more porous/loose and apatite particles become larger in size. When exposed to a high dose (120 kGy) of gamma-radiation, TTCP structure is radiation-damaged, and gamma-ray-induced formation of apatite is confirmed by transmission electron microscopic/selected-area diffraction/lattice imaging analyses.

Bone Cements↗

Influence of initial component temperature on the apparent viscosity and handling characteristics of acrylic (PMMA) bone cement.

The flow and polymerization characteristics of poly(methylmethacrylate) (PMMA) bone cement can be changed by manipulating the temperature of the bone cement components or the environment that they are prepared in. To quantify the effects of the initial component temperature (T(ic)) of acrylic bone cement on the rheological and handling characteristics, ASTM F451-99a compliant methods and clinically relevant testing methods were utilized. A rheometer was designed and fabricated using the dimensions of a clinical, commercially available, cement gun and nozzle. The influence on the apparent viscosity and handling characteristics (setting time, working time, and peak exotherm temperature) for a high viscosity (HV) commercially-available acrylic bone cement, Palacos R, were determined. The values of T(ic) used were 23 degrees C (room), 6 degrees C (refrigerator), and -14 degrees C (freezer). Using the apparent viscosity of a medium viscosity (MV) bone cement as a benchmark (Simplex P at room temperature), it was found that by adjusting the T(ic) the HV cement was able to mimic the flow characteristics of the MV cement. Lowering the T(ic) lowered the apparent viscosity of the bone cement. The effects of T(ic) on the polymerization of bone cement were studied in dynamic and static conditions. The dynamic test recorded temperature and torque from stirring resistance. Setting times were also determined using the ASTM exotherm mold method. The setting times determined by the dynamic testing conditions were consistently shorter than those determined by the ASTM method. Lowering the T(ic) increased the working and setting times; however, it did not have a significant effect on the peak exotherm temperature.

Bone Cements↗

Self-setting properties of a beta-dicalcium silicate reinforced calcium phosphate cement.

Beta-dicalcium silicate was used to reinforce the injectable calcium phosphate cement (iCPC) for the first time in this study. The influence of the content of beta-dicalcium silicate on the mechanical properties, setting time, rheological properties, injectability, phase evolution, microstructure, and biodegradability of iCPC was systematically investigated. The results demonstrated that the addition of 8 wt % beta-dicalcium silicate obviously enhanced the compressive strength of the CPC from 26.5 to 47.5 MPa, and did not significantly influence the biodegradability, setting time, injectability, phase evolution, and microstructure of the CPC. The beta-dicalcium silicate-reinforced iCPC with relatively high mechanical property should have potential prospects for the wider applications in surgery such as orthopedics, oral, and maxillofacial surgery.

Bone Cements↗