PubMed Health⌕ Search
Home/Archive/PubMed

PubMed · 15132184

The 3D model: explaining densification and deformation mechanisms by using 3D parameter plots.

Katharina M Picker
View original source ↗Export metadata ↓

Abstract

The aim of the study was to analyze very differently deforming materials using 3D parameter plots and consequently to gain deeper insights into the densification and deformation process described with the 3D model in order to define an ideal tableting excipient. The excipients used were dicalcium phosphate dihydrate (DCPD), sodium chloride (NaCl), microcrystalline cellulose (MCC), xylitol, mannitol, alpha-lactose monohydrate, maltose, hydroxypropyl methylcellulose (HPMC), sodium carboxymethylcellulose (NaCMC), cellulose acetate (CAC), maize starch, potato starch, pregelatinized starch, and maltodextrine. All of the materials were tableted to graded maximum relative densities (rhorel, max) using an eccentric tableting machine. The data which resulted, namely force, displacement, and time, were analyzed by the application of 3D modeling. Different particle size fractions of DCPD, CAC, and MCC were analyzed in addition. Brittle deforming materials such as DCPD exhibited a completely different 3D parameter plot, with low time plasticity, d, and low pressure plasticity, e, and a strong decrease in omega values when densification increased, in contrast to the plastically deforming MCC, which had much higher d, e, and omega values. e and omega values changed only slightly when densification increased for MCC. NaCl showed less of a decrease in omega values than DCPD did, and the d and e values were between those of MCC and DCPD. The sugar alcohols, xylitol and mannitol, behaved in a similar fashion to sodium chloride. This is also valid for the crystalline sugars, alpha-lactose monohydrate, and maltose. However, the sugars are more brittle than the sugar alcohols. The cellulose derivatives, HPMC, NaCMC, and CAC, are as plastic as MCC, however, their elasticity depends on substitution indicated by lower (more elastic) or higher (less elastic) omega values. The native starches, maize starch and potato starch, are very elastic, and pregelatinized starch and maltodextrine are less elastic and exhibited higher omega values. Deformation behavior as shown in 3D parameter plots depends on particle size for polymers such as CAC and MCC; however, it does not depend on particle size for brittle materials such as DCPD. An ideally deforming tableting excipient should exhibit high e, d, and omega values with a constant ratio of e and omega at increasing densification.

Explore related subjects

ExcipientsModels, StructuralParticle SizeTabletsTechnology, PharmaceuticalJournal Article

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Katharina M Picker. 2004. The 3D model: explaining densification and deformation mechanisms by using 3D parameter plots.. https://doi.org/10.1081/ddc-120030936

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2006

The usefulness of simple X-ray powder diffraction analysis for counterfeit control--the Viagra example.

Counterfeit and illegally manufactured drugs become a very important problem all over the world, hence, a search for new fast, easy, reliable and not expensive methods of drugs screening is essential. We describe the use of X-ray powder diffraction method for the fast screening of tablets for counterfeit medicines identification. The original Viagra tablets and some counterfeit and/or imitations of Viagra were used as example. We demonstrate the application of diffraction method for discrimination of tablets coatings and for identification of differences in drug composition. The X-ray diffraction method turns out to be very fast and reliable for detecting counterfeits and imitation, and it correctly predicts the presence or absence of active substance and/or particular excipients.

Excipients↗
PubMed2006

Synthetic approaches to uniform polymers.

Uniform polymers are characterised by a narrow molecular weight distribution (MWD). Uniformity is also defined by chemical structure in respect of (1) monomer orientation, sequence and stereo-regularity, (2) polymer shape and morphology and (3) chemical functionality. The function of natural polymers such as polypeptides and polynucleotides is related to their conformational structure (e.g. folded tertiary structure). This is only possible because of their high degree of uniformity. While completely uniform synthetic polymers are rare, polymers with broad structure and MWD are widely used in medicine and the biomedical sciences. They are integral components in final dosage forms, drug delivery systems (DDS) and in implantable devices. Increasingly uniform polymers are being used to develop more complex medicines (e.g. delivery of biopharmaceuticals, enhanced formulations or DDS's for existing actives). In addition to the function imparted by any new polymer it will be required to meet stringent specifications in terms of cost containment, scalability, biocompatibility and performance. Synthetic polymers with therapeutic activity are also being developed to exploit their polyvalent properties, which is not possible with low molecular weight molecules. There is need to utilise uniform polymers for applications where the polymer may interact with the systemic circulation, tissues or cellular environment. There are also potential applications (e.g. stimuli responsive coatings) where uniform polymers may be used for their more defined property profile. While it is not yet practical to prepare synthetic polymers to the same high degree of uniformity as proteins, nature also effectively utilises many polymers with lower degrees of uniformity (e.g. polysaccharides, poly(amino acids), polyhydroxyalkanoates). In recent years it has become possible to prepare with practical experimental protocols sufficient quantities of polymers that display many aspects of uniformity. This review describes practical strategies for polymer synthesis focusing on addition processes that have been developed that allow narrow MWD polymers to be prepared. Also described are some examples where aspects of polymer uniformity in terms of molecular weight and/or chemical constitution are exploited for their unique properties.

Excipients↗
PubMed2006

Initial studies of water granulation of eight grades of hypromellose (HPMC).

The purpose of this study is to investigate the water granulation mechanism of the hydrophilic matrix polymer HPMC in a high shear mixer and to relate the properties of the granules and tablets to the molecular weight and the degree of substitution for eight HPMC grades. Although the hydrophilic matrix system is a well known drug delivery one, there is a difficulty in that the desirable water granulation technique often causes problems in the presence of relatively large amounts of HPMC due to its hydrophilicity. The results of this study show that the properties of the granules and the tablets fall into two groups according to whether the molecular weight of the polymer is high or low. The granules of low molecular weight were smaller and more compact, with better flow properties but with less tensile strength of the compacts, whereas the opposite was valid for granules of high molecular weight. The explanation for these differences is linked to the proposed granulation mechanism of HPMC, in which the properties of the gel layer are important. The dominant factors governing the properties are the molecular weight and, to lesser extent, the degree of substitution.

Excipients↗