Microsystems: applications in implanted devices.

M Wilkinson

PubMed · 15326788

Microsystems: applications in implanted devices.

Abstract

Microsystems are devices that incorporate a combination of microfluidic, micromechanical, microoptical and microelectronic components. This article is part of a series that is assessing the impact the technology is likely to have on medical products during the next 10 years. The implanted devices discussed here include heart pacemakers, stents, and devices for the restoration of bladder function and limb movement for paraplegics. The next article will cover cochlear implants, retinal implants and stimulation of the optical cortex.

Explore related subjects

Biomedical Engineering Electronics, Medical Humans Prostheses and Implants Prosthesis Design United Kingdom Journal Article

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

M Wilkinson. Microsystems: applications in implanted devices.. https://pubmed.ncbi.nlm.nih.gov/15326788/

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2006

Virtual parameter-estimation experiments in Bioprocess-Engineering education.

Cell growth kinetics and reactor concepts constitute essential knowledge for Bioprocess-Engineering students. Traditional learning of these concepts is supported by lectures, tutorials, and practicals: ICT offers opportunities for improvement. A virtual-experiment environment was developed that supports both model-related and experimenting-related learning objectives. Students have to design experiments to estimate model parameters: they choose initial conditions and 'measure' output variables. The results contain experimental error, which is an important constraint for experimental design. Students learn from these results and use the new knowledge to re-design their experiment. Within a couple of hours, students design and run many experiments that would take weeks in reality. Usage was evaluated in two courses with questionnaires and in the final exam. The faculties involved in the two courses are convinced that the experiment environment supports essential learning objectives well.

Biomedical Engineering↗

PubMed2005

Microbial transformations 59: first kilogram scale asymmetric microbial Baeyer-Villiger oxidation with optimized productivity using a resin-based in situ SFPR strategy.

This study is demonstrating the scale up of asymmetric microbial Baeyer-Villiger oxidation of racemic bicyclo[3.2.0]hept-2-en-6-one (1) to the kilogram scale using a 50 L bioreactor. The process has been optimized with respect to bottlenecks identified in downscaled experiments. A high productivity was obtained combining a resin-based in situ substrate feeding and product removal methodology (in situ SFPR), a glycerol feed control, and an improved oxygenation device (using a sintered-metal sparger). As expected both regioisomeric lactones [(-)-(1S,5R)-2 and (-)-(1R,5S)-3] were obtained in nearly enantiopure form (ee > 98%) and good yield. This represents the first example of such an asymmetric Baeyer-Villiger biooxidation reaction ever operated at that scale. This novel resin-based in situ SFPR technology therefore clearly opens the way to further (industrial) upscaling of this highly valuable (asymmetric) reaction.

Biomedical Engineering↗

PubMed2005

Comparison of stimulation patterns for FES-cycling using measures of oxygen cost and stimulation cost.

AIM: The energy efficiency of FES-cycling in spinal cord injured subjects is very much lower than that of normal cycling, and efficiency is dependent upon the parameters of muscle stimulation. We investigated measures which can be used to evaluate the effect on cycling performance of changes in stimulation parameters, and which might therefore be used to optimise them. We aimed to determine whether oxygen cost and stimulation cost measurements are sensitive enough to allow discrimination between the efficacy of different activation ranges for stimulation of each muscle group during constant-power cycling. METHODS: We employed a custom FES-cycling ergometer system, with accurate control of cadence and stimulated exercise workrate. Two sets of muscle activation angles ("stimulation patterns"), denoted "P1" and "P2", were applied repeatedly (eight times each) during constant-power cycling, in a repeated measures design with a single paraplegic subject. Pulmonary oxygen uptake was measured in real time and used to determine the oxygen cost of the exercise. A new measure of stimulation cost of the exercise is proposed, which represents the total rate of stimulation charge applied to the stimulated muscle groups during cycling. A number of energy-efficiency measures were also estimated. RESULTS: Average oxygen cost and stimulation cost of P1 were found to be significantly lower than those for P2 (paired t-test, p<0.05): oxygen costs were 0.56+/-0.03l min-1 and 0.61+/-0.04l min-1 (mean+/-S.D.), respectively; stimulation costs were 74.91+/-12.15 mC min-1 and 100.30+/-14.78 mC min-1 (mean+/-S.D.), respectively. Correspondingly, all efficiency estimates for P1 were greater than those for P2. CONCLUSION: Oxygen cost and stimulation cost measures both allow discrimination between the efficacy of different muscle activation patterns during constant-power FES-cycling. However, stimulation cost is more easily determined in real time, and responds more rapidly and with greatly improved signal-to-noise properties than the ventilatory oxygen uptake measurements required for estimation of oxygen cost. These measures may find utility in the adjustment of stimulation patterns for achievement of optimal cycling performance.

Biomedical Engineering↗