PubMed Health⌕ Search
Home/Archive/PubMed

PubMed · 15349952

Release-modulating factors strongly affecting steroid diffusion from silicone elastomer.

Harold A Nash·Dale N Robertson·Simone J Evans
View original source ↗Export metadata ↓

Abstract

Investigations were undertaken to determine the cause of decreases over time in the release rate from levonorgestrel (LNG) implants consisting of silicone elastomer tubing filled with crystalline steroid. Emptying and refilling with the same steroid partially restored release rate. Surprisingly, a further increment in release rates was attained if the tubing was briefly irrigated with methanol before refill. Fractional crystallization showed that release-modulating factors could be concentrated in mother liquors and were initially present as impurities. Boiling LNG in ethanol or methanol produced a number of release-modulating factors of which the most prominent was also found in one production lot of LNG. It was identified as 6beta-hydroxy-levonorgestrel (6beta-OH-LNG). Added to LNG at the 2% level, 6beta-OH-LNG decreased the release rate by 27%.

Explore related subjects

CapsulesChemistry, PharmaceuticalChromatography, High Pressure LiquidChromatography, LiquidChromatography, Thin LayerCrystallizationDrug CompoundingDrug ImplantsLevonorgestrelMethanolSilicone ElastomersJournal ArticleResearch Support, Non-U.S. Gov't

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Harold A Nash, Dale N Robertson, Simone J Evans. 2004. Release-modulating factors strongly affecting steroid diffusion from silicone elastomer.. https://doi.org/10.1002/jps.20158

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2006

Development and optimization of a novel sustained-release dextran tablet formulation for propranolol hydrochloride.

A novel oral controlled delivery system for propranolol hydrochloride (PPL) was developed and optimized. The in vitro dissolution profiles of sustained-release matrix tablets of racemic PPL were determined and compared with the United States Pharmacopeia (USP) tolerance specifications for Propranolol Hydrochloride Extended-Release Capsules. The influence of matrix forming agents (native dextran, hydroxypropyl methylcellulose (HPMC), cetyl alcohol) and binary mixtures of them on PPL release in vitro was investigated. A central composite design was applied to the optimization of a sustained-release tablet formulation. The sustained-release matrix tablets with good physical, mechanical and technological properties were obtained with a matrix excipient:PPL ratio of 60:40 (w/w), with a dextran:HPMC ratio of 4:1 (w/w) and with a cetyl alcohol amount of 15% (w/w). A comparative kinetic study of the present matrix tablets and commercial SUMIAL RETARD capsules (Spain) was established. The value for the similarity factor (f(2)=69.6) suggested that the dissolution profile of the present two sustained-release oral dosage forms are similar. Higuchi (diffusion) and Hixon-Crowell (erosion) kinetic profiles were achieved and this codependent mechanism of drug release was established.

Capsules↗
PubMed2006

Novel design of osmotic chitosan capsules characterized by asymmetric membrane structure for in situ formation of delivery orifice.

In this study, chitosan capsules with asymmetric membrane to induce osmotic effects and in situ formation of the delivery orifice were optimally prepared and characterized. Chitosan capsules were formed on stainless steel mold pins by dipping the pins into a chitosan solution followed by forming asymmetric structure by dipping into a quenching solution containing tripolyphosphate (TPP) to cause an ionic cross-linking reaction between the outer layer of chitosan and TPP. Factors influencing the properties of the capsule membrane, such as the molecular weight of chitosan, the dipping solution and dipping time, and the quenching solution and time, were optimized to successfully produce osmotic chitosan capsules with asymmetric membrane using chitosans that possessed different viscosities. In situ formation of a delivery orifice on the asymmetric membrane of the chitosan capsule was proven by the observation of a jet stream of chlorophyll being released from the capsule. Drugs with different solubility were selected, and a linear correlation between drug solubility and the initial drug release rate calculated from the slope of the drug release profile was used to verify that the delivery orifices that were in situ formed on the asymmetric membrane of the chitosan capsules induced by osmotic effect was responsible for the drug release. Water permeability across the optimally produced asymmetric membrane of the capsule from chitosan of 500 cps (300-700 cps) quenched with TPP for 30 min (C500/TPP30) was determined to be 1.40 x 10(-6)cm(2)h(-1)atm(-1) at 37.0+/-0.5 degrees C. The encapsulation of poorly water-soluble drugs, felodipine (FE) and nifedipine (NF), in such an asymmetric chitosan capsule was capable of creating a sufficient osmotic effect to activate the release of the drug with the addition of SLS and HPMC. The multiple regression equations of maximal release percent at 24h for FE and NF confirmed that both sodium lauryl sulfate (SLS) and hydroxypropyl methylcellulose (HPMC) positively influenced this response factor, and the effect of SLS was greater than that of HPMC.

Capsules↗
PubMed2006

Influence of rheological behaviour of particulate/polymer dispersions on liquid-filling characteristics for hard gelatin capsules.

Lactose/poloxamer dispersions were prepared by mixing under vacuum to achieve a de-aerated mix with good capsule filling properties and disperse phase uniformity at 70 degrees C. Satisfactory capsule filling of molten dispersions was achieved up to a limiting concentration of disperse phase, dependent on particle size distribution and continuous phase viscosity. Lactose/poloxamer dispersions exhibited thixotropic shear thinning behaviour with an abrupt increase in apparent viscosity above a limiting concentration of disperse phase. There was a good correlation between satisfactory filling of molten dispersions into capsules and apparent viscosity of the formulation, whereas, the pronounced increase in apparent viscosity resulted in unsatisfactory filling above a critical concentration of disperse phase. The rheological data was analysed in detail using empirical models and also used to identify capsule filling problems at extrudate shear rates for flow from hopper to pump (12 s(-1)) and from nozzle to capsule (340 s(-1)).

Capsules↗