Planar electrochromatography.

Abstract

Recent developments in planar electrochromatography (PEC) in both the normal-phase and the reversed-phase modes, and at both atmospheric and elevated pressure, are reviewed. Other forced-flow techniques in planar chromatography are also briefly covered. Mobile phase migration in PEC is primarily due to electroosmotic flow, which is controlled by the applied electric field. Capillary mediated flow is an important secondary contributor to migration, and occurs because the layer is unsaturated as a consequence of liquid evaporating from the layer due to Joule heating. The magnitude of the electric field and the concentration of ions in solution are important variables that control both electroosmotic flow and Joule heating. Separations are faster and more efficient than those obtained by conventional planar chromatography, provided appropriate experimental conditions are selected. With inappropriate conditions, either mobile phase accumulates on the surface of the sorbent layer, or Joule heating causes excessive evaporation. The former results in poor spot shape, and the latter can cause the layer to dry. Good separations are obtained when there is a balance between these two effects. The problems associated with mobile phase accumulating on the surface of the sorbent layer, and with excessive evaporation of mobile phase, do not occur with pressurized planar electrochromatography. This technique is performed at high pressure, under conditions that allow heat to be removed form the sorbent layer. This allows the use of a substantially higher electric field than in PEC, and results in a high mobile phase flow rate.