PubMed Health⌕ Search

PubMed · 15357185

Photoacoustic imaging with deconvolution algorithm.

Abstract

The impulse response of the ultrasonic transducer used for detection is crucial for photoacoustic imaging with high resolution. We demonstrate a reconstruction method that allows the optical absorption distribution of a sample to be reconstructed without knowing the impulse response of the ultrasonic transducer. A convolution relationship between photoacoustic signals measured by an ultrasound transducer and optical absorption distribution is developed. Based on this theory, the projection of the optical absorption distribution of a sample can be obtained directly by deconvolving the recorded PA signal originating from a point source out of that from the sample. And a modified filtered back projection algorithm is used to reconstruct the optical absorption distribution. We constructed a photoacoustic imaging system to validate the reconstruction method and the experimental results demonstrated that the reconstructed images agreed well with the original phantom samples. The spatial resolution of the system reaches 0.3 mm.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Yi Wang, Da Xing, Yaguang Zeng, Qun Chen. 2004-07-21. Photoacoustic imaging with deconvolution algorithm.. https://doi.org/10.1088/0031-9155%2F49%2F14%2F006

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

The singing power ratio as an objective measure of singing voice quality in untrained talented and nontalented singers.

A growing body of contemporary research has investigated differences between trained and untrained singing voices. However, few studies have separated untrained singers into those who do and do not express abilities related to singing talent, including accurate pitch control and production of a pleasant timbre (voice quality). This investigation studied measures of the singing power ratio (SPR), which is a quantitative measure of the resonant quality of the singing voice. SPR reflects the amplification or suppression in the vocal tract of the harmonics produced by the sound source. This measure was acquired from the voices of untrained talented and nontalented singers as a means to objectively investigate voice quality differences. Measures of SPR were acquired from vocal samples with fast Fourier transform (FFT) power spectra to analyze the amplitude level of the partials in the acoustic spectrum. Long-term average spectra (LTAS) were also analyzed. Results indicated significant differences in SPR between groups, which suggest that vocal tract resonance, and its effect on perceived vocal timbre or quality, may be an important variable related to the perception of singing talent. LTAS confirmed group differences in the tuning of vocal tract harmonics.

Acoustics↗

Optical analysis of perfusion bioreactor cell concentration in an acoustic separator.

Automated monitoring of cell concentration in perfusion bioprocesses facilitates the maintenance of constant cell specific perfusion rates. However, most on-line measuring devices are relatively complex and foul as the culture progresses. A simple external optical sensor was developed using the transparent glass walls of acoustic separators for automated optical analysis of their contents. For each measurement, the separator was filled by an automated pumping system with triplicate representative bioreactor samples that were optically analyzed and the device returned to perfusion operation within approximately 1 or 2 min. Chinese hamster ovary cell concentrations, ranging from 5 x 10(5) to 2 x 10(7) cells/mL, were highly correlated (R(2) = 0.99) with the 90 degrees scattered light response. Since the device was operated externally, it did not complicate bioreactor sterilization or cleaning. Viability was not optically analyzed, but this information was not required between manual samples of a properly operated perfusion process. Using single-point recalibration based on routine off-line samples, this external optical system remained effective during a 4-month perfusion run, thus providing a non-invasive and easily maintained on-line cell concentration monitoring system to improve the control of perfusion bioreactors.

Acoustics↗

Defect-induced fatigue microcrack formation in cement mantle.

Acoustic emission (AE) was used to monitor the progress of the fatigue damage process in the cement mantles of two cemented femur stem constructs that contained naturally occurring defects. After the fatigue tests, morphological features of the defects were investigated using an environmental scanning electron microscope. It showed that the regions with no visible defects were mainly microcrack free, whereas the defect regions were the main sources generating microcracks. Two types of microcracks were identified: type I and type II. Signal energies associated with type I microcracks were about an order of magnitude higher than that of type II. The microstructural investigations of the defects and the areas in the vicinity of the defects suggested their categorization into stable and unstable. The accumulative energy-time relationships revealed that stable and unstable microcrack curves had convex [formula: see text], and concave [formula: see text] shapes, respectively. The progress of fatigue microcrack formation occurred over three distinct phases: initiation, transition, and stableness.

Acoustics↗