PubMed Health⌕ Search

PubMed · 15461490

Patterning multiple aligned self-assembled monolayers using light.

Abstract

This work describes a method for patterning a gold substrate with multiple, aligned self-assembled monolayers (SAMs) using light at different wavelengths. It describes the synthesis and characterization of an alkanethiolate SAM that is photosensitive to light at both 220 and 365 nm. A photomask acts as an area-selective filter for light at 220 and 365 nm, and a single set of exposures at these two wavelengths through one photomask, without steps of alignment between the exposures, can produce three aligned SAMs on one gold substrate. We demonstrate the versatility of this method of photopatterning by modifying individual aligned SAMs chemically to produce surfaces having different properties. We characterize the modified SAMs using immunolabeling, matrix-assisted laser desorption/ionization time-of-flight mass spectroscopy, and surface plasmon resonance spectroscopy. We also describe the patterning of two aligned SAMs that resist the adsorption of proteins and a third region that does not resist the adsorption of proteins. The ability to produce multiple, aligned patterns of SAMs in a single step, without alignment of photomasks in separate steps, increases the versatility of SAMs for studying a range of physical phenomena.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Declan Ryan, Babak Amir Parviz, Vincent Linder, Vincent Semetey, Samuel K Sia, Jing Su, Milan Mrksich, George M Whitesides. 2004-10-12. Patterning multiple aligned self-assembled monolayers using light.. https://doi.org/10.1021/la048443u

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Three-dimensional porous nano-hydroxyapatite@gelatin composite as efficient adsorbent for uranyl ion removal from low-level radioactive wastewater.

The contamination of water resources by uranyl (UO22+) ions poses significant environmental and health risks, requiring the development of efficient and sustainable remediation strategies. Adsorption-based techniques have emerged as promising approaches in the field of UO22+ removal, but the design of cost-effective, high-capacity, and environmentally friendly adsorbents remains challenging. In this study, a three-dimensional porous nano-hydroxyapatite@gelatin (nHAP@Ge) composite was synthesized through glutaraldehyde cross-linking, combining the structural stability of Ge with the high uranium affinity of nHAP. The optimized nHAP@Ge, with a nHAP:Ge mass ratio of 1:0.5, exhibited exceptional UO22+ removal efficiency (97 %), along with high adsorption capacity (364.03 mg/g). Systematic characterizations using scanning electron microscopy (SEM), thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR) spectroscopy, and X-ray photoelectron spectroscopy (XPS) methods revealed that the porous structure and surface functional groups (-OH, Ca2+, and PO43-) of the material synergistically contributed to binding UO22+ species. Furthermore, the incorporation of nHAP into the Ge framework resulted in enhanced thermal stability while significantly improving the UO22+ adsorption performance. This work presents a scalable, eco-friendly, and recyclable strategy for the effective treatment of uranium-contaminated water, with potential applications in nuclear wastewater treatment and environmental remediation.

Adsorption↗

Effect of biopassive and bioactive surface-coatings on the hemocompatibility of membrane oxygenators.

Postoperative complications associated with cardiopulmonary bypass (CPB) surgery and extracorporeal circulation (ECC) procedures are still a major clinical issue. Improving the hemocompatibility of blood contacting devices used for ECC procedures may ameliorate various postpump syndromes. In a simulated CPB model using human blood, we investigated the hemocompatibility, fibrinogen adsorption, and platelet receptor (GPIIb-IIIa) binding capacity of surface-modified membrane oxygenators (Jostra Quadrox). Three groups were compared: (i) biopassive protein coatings (SafeLine), (ii) bioactive heparin coatings (BioLine), and (iii) noncoated controls. During the 2 h recirculation period, plasma concentrations of activation markers for platelets (beta-thromboglobulin), inflammation (elastase), complement (C5a), and coagulation (prothrombin fragment 1+2, thrombin-antithrombin III) were lower in the groups with biopassive and bioactive coatings compared to the noncoated group (p < 0.01). These parameters did not significantly differ between the two surface-coated groups, except for complement activation: C5a levels were higher in the biopassive group compared to the bioactive group (p < 0.01). Moreover, surface-coated oxygenators showed less fibrinogen adsorption, GPIIb-IIIa binding, and platelet/leukocyte adhesion (p < 0.01). We assume that fewer fibrinogen and platelet receptor molecules bound to the surface-coated oxygenator surfaces results in fewer platelet adhesion and activation, which will significantly contribute to the improved hemocompatibility of the biopassive and bioactive oxygenators. Our results suggest that the application of bioactive oxygenators (BioLine) during CPB surgery may reduce postoperative complications for the patient more effectively than biopassive oxygenators (SafeLine).

Adsorption↗

A high-rate perfusion bioreactor for plant cells.

A perfusion bioreactor allowing continuous extraction of secondary metabolites was designed and challenged for Eschscholtzia californica plant cell suspensions. Four sedimentation columns mounted inside a 2.5-L bioreactor separated single cells and cell aggregates from the culture medium. Cells were elicited with chitin at day 4 and the liquid medium free of cells and debris was then continuously pumped to the extraction columns containing fluidized XAD-7 resins, and then recirculated back to the cell suspension. A medium upward velocity corresponding to cell sedimentation velocity maintained a stable cell/medium separation front in the columns for sedimented cell volume (SCV) of 90% (70% packed cell volume, PCV). Two perfusion bioreactor cultures of 10 and 14 days were performed. A maximum dilution rate of 20.4/day was reached from day 4 to day 6, and was then reduced to 5/day at day 9 for 55% SCV. Control cultures were performed without and with free extraction resins into the cell suspension. Perfusion cultures showed similar specific growth rates of 0.24 +/- 0.04/day before and after elicitation. However, production level in the perfusion cultures was similar to that from the culture without resins with a maximum of 2.06 micromole/gDW total alkaloids, with 1.54 micromole/gDW in the resins. Cultures with free resins resulted in 30.94 micromole/gDW with 28.4 +/- 8.8 micromole/gDW in the resins. Difference in the cells nutritional state from elicitation was identified as a major cause in the production reduction. However, pathway to chelilutine was favored in the continuous extraction culture.

Adsorption↗