Horizontal fall arrest systems: rigid systems vs. flexible line systems.

Abstract

There are many types of flexible and rigid systems on the market, both permanent and temporary. This article does not mean to encompass all possible systems or hazards and only intends to give an outline of what at a minimum should be examined to make an educated purchasing decision. In many instances, the buyer will use the same type of horizontal system for all situations. This is a good idea in some cases because it will reduce the need for training on a number of different systems, reduce system compatibility issues, and may reduce costs for installation, supply, and maintenance. This may not be the best idea if the hazard areas differ a great deal; as we have illustrated, one system may not function for all areas and tasks. The rigid system is typically the best solution simply based on the fact the worker won't fall as far as when he is connected to a flexible system, because of the elimination of any dynamic sag and horizontal energy absorber deployment. In any case, where you stop the worker from falling farther, you decrease the chance there may be an incident where the worker is injured. From a cost standpoint, flexible fall arrest systems typically are cheapest. In the end, safety professionals must balance the cost and effectiveness of the system to prevent an injury.