PubMed Health⌕ Search
Home/Archive/PubMed

PubMed · 15560011

Scatter correction for three-dimensional PET based on an analytic model dependent on source and attenuating object.

L G Hiltz·B T McKee
View original source ↗Export metadata ↓

Abstract

Three-dimensional positron emission tomography admits a significant scatter fraction due to the large aperture of the detectors, and requires accurate scatter subtraction. A scatter-correction method, applicable to both emission and transmission imaging, calculates the projections of the single-scatter distribution, using an approximate image of the source and attenuating object. The scatter background is subtracted in projection space for transmission data and in image space for emission data, yielding corrected attenuation and emission images. The accuracy of this single-scatter distribution is validated for the authors' small imaging system by comparison with Monte Carlo simulations. The correction is demonstrated using transmission and emission data obtained from measurements on the authors' QPET imaging system using two acrylic phantoms. For the transmission data, generated with a flood source, errors of up to 24% in the linear attenuation coefficients resulted with no scatter subtraction, but the correction yielded an accurate value of mu =0.11+or-0.01 cm-1. For the emission data, the corrected images show that the scattered background has been removed to within the level of the background noise outside the source. The residual amplitude within a cold spot in one of the phantoms was reduced from 21% to 3% of the image amplitude.

Explore related subjects

Image Processing, Computer-AssistedImaging, Three-DimensionalMonte Carlo MethodPhantoms, ImagingPositron-Emission TomographyScattering, RadiationJournal ArticleResearch Support, Non-U.S. Gov't

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

L G Hiltz, B T McKee. 1994. Scatter correction for three-dimensional PET based on an analytic model dependent on source and attenuating object.. https://doi.org/10.1088/0031-9155%2F39%2F11%2F016

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2007

Rapid and accurate measurement for phase-change optical recording bits.

Conducting atomic force microscopy (CAFM) and scanning surface potential microscopy (SSPM) have been used to image the phase-change optical recording bits. Commercially available digital versatile discs (DVD) + rewritable (RW) with initialization process were measured in experiments. Comparing the measurement results of both, the measurement resolution of CAFM is far superior to that of SSPM. With the DVD + RW disc rotating at a linear speed of 3.5 m/s, appropriate writing laser power range, may be precisely identified by CAFM as 10-15 mW. This is sufficient to verify the high-resolution recording bits research method. This new method may also be applied to the development of new types of phase-change recording materials.

Image Processing, Computer-Assisted↗
PubMed2007

Image analysis by pulse coupled neural networks (PCNN)--a novel approach in granule size characterization.

A biologically inspired spiking neural network model, the pulse coupled neural network (PCNN), has been applied for the first time in bulk particle characterization, and specifically in the characterization of pharmaceutical granule size distributions. The PCNN was trained on surface images of pharmaceutical granule beds, and the adjustable parameters (radius neuron interconnection, r0, linking weight coefficient, beta, local threshold potential, VTheta, and number of iterations) were successfully optimized using design of experiments. As demonstrated with size fractions of granules, it was found that the PCNN produced granule size-dependent signals. In general, a first highest and relatively narrow peak located in the region of two to twelve iterations corresponded to smaller particle size, while larger particles resulted in wider peaks and in highest (not first) peak at a range between 13 and 25 iterations. Better predictions, i.e. lower RMSEP (root mean squared error of prediction) values, were obtained using high beta value, low r0 and VTheta values, while the number of iterations had to exceed 110 and the optimized model (RMSEP lower than 5) corresponded to PCNN variables: r0=1, beta=0.4, VTheta=2, and number of iterations=150. The coefficient of determination (R2) of the model was 0.94 and the predicted variation (Q2) was 0.91, while the Pearson correlation coefficient between the predicted and the measured mean particle size by sieving for eight test batches was 0.98. These findings could be characterized as promising and encouraging for the further use of image analysis by PCNNs in pharmaceutical bulk particle size and shape characterization.

Image Processing, Computer-Assisted↗
PubMed2007

Production of siRNA- and cDNA-transfected cell arrays on noncoated chambered coverglass for high-content screening microscopy in living cells.

In this chapter, we provide a protocol for the production of transfected cell arrays in living mammalian cells on noncoated chambered coverglass for the systematic functional analyses of human genes by high-content screening microscopy. This method should facilitate drug target validation by small-interfering RNAs.

Image Processing, Computer-Assisted↗