PubMed Health⌕ Search
Home/Archive/PubMed

PubMed · 15561367

Stabilized leachates: sequential coagulation-flocculation + chemical oxidation process.

F Javier Rivas·Fernando Beltrán·Fátima Carvalho·Benito Acedo·Olga Gimeno
View original source ↗Export metadata ↓

Abstract

The combined sedimentation-chemical oxidation treatment of medium-stabilized landfill leachates has been investigated. The sequence of stages implemented was: (a) coagulation-flocculation by pH decrease (pH 2) to acidic conditions (COD removal approximately 25% related to COD0 approximately 7500 ppm); (b) coagulation-flocculation by Fe(III) addition (0.01 M) at pH 3.5 (COD removal approximately 40% related to COD of supernatant after step (a); (c) Fenton (Fe(III) = 0.01 M; H2O2 = 1.0 M) oxidation (COD removal approximately 80% related to COD of supernatant after step (a); and (d) coagulation-flocculation of Fenton's effluent at pH 3.5 (COD removal approximately 90% related to COD of supernatant after step (a). The use of Kynch theory allows for the design of clarifiers based on the amount of solids fed. For a general example of 1000 m3 day(-1) of a feeding stream, clarifier area values of 286,111 and 231 m2 were calculated for compacting indices of 3.7, 2.67 and 2.83 corresponding to the first, second and third consecutive sedimentation processes, respectively, (steps (a), (b) and (d)).

Explore related subjects

Environmental PollutionFlocculationHydrogen-Ion ConcentrationOxidation-ReductionRefuse DisposalSoil PollutantsWater PollutantsJournal ArticleResearch Support, Non-U.S. Gov't

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

F Javier Rivas, Fernando Beltrán, Fátima Carvalho, Benito Acedo, Olga Gimeno. 2004-12-10. Stabilized leachates: sequential coagulation-flocculation + chemical oxidation process.. https://doi.org/10.1016/j.jhazmat.2004.07.022

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2007

Metal pollution assessment of surface sediments along a new gas pipeline in the Niger Delta (Nigeria).

Chromium, nickel, copper, zinc and cadmium were determined in sediments of the Niger Delta (Nigeria) in order to discriminate between natural metal sources and anthropogenic ones. Surface sediments were collected at seven sites along a new gas pipeline near Port Harcourt, between the New Calabar River and the Bonny River towards Bonny town. Chemical characterisation is obtained by hydrofluoric-nitric acid digestion procedure, providing the 'total' ('residual') metal contents. Information about the anthropogenic metal fraction was obtained by cold diluted hydrochloric acid extraction procedure. This 'labile' acid soluble fraction of metals, perhaps due to relatively recent inputs in the sediments, constitutes the fraction more likely to be available to marine organisms, and furnishes a first evaluation of the possible toxicity of sediments of this sensitive ecosystem. Zinc appears to be the most available of all the heavy metals: its 'labile' fraction attains 40-50% of the 'total' zinc in sediment. Sites near Port Harcourt city are the most contaminated. All the examined metals are one order of magnitude below the respective values proposed as a limit for toxicity and are comparable with those observed by other authors in similar Niger Delta areas. Some anomalous data found near Port Harcourt city suggest that zinc and cadmium are the metals that require further monitoring. Their anthropogenic source could be derived from urban and industrial sewage.

Environmental Pollution↗
PubMed2006

Imaging and speciation of trace elements in biological environment.

Mineral elements, often at the trace level, play a considerable role in physiology and pathology of biological systems. Metallogenomics, metalloproteomics, and metallomics are among the emerging disciplines which are critically dependent on spatially resolved concentration maps of trace elements in a cell or tissue, on information on chemical speciation, and on that on metal-binding coordination sites. The mini-review discusses recent progress in analytical techniques for element profiling on the genome scale, biological trace element imaging, and probing, identification and quantification of chemical species in the biological environment. Imaging of the element distribution in cells and tissue sections is becoming possible with sub-micrometer spatial resolution and picogram-level sensitivity owing to advances in laser ablation MS, ion beam and synchrotron radiation X-ray fluorescence microprobes. Progress in nanoflow chromatography and capillary electrophoresis coupled with element specific ICP MS and molecule-specific electrospray MS/MS and MALDI enables speciation of elements in microsamples in a complex biological environment. Laser ablation ICP MS, micro-SXRF, and micro-PIXE allow mapping of trace element distribution in 1D and 2D proteomics gels. The increasing sensitivity of EXAFS and XANES owing to the use of more intense synchrotron beams and efficient focusing optics provide information about oxidation state, fingerprint speciation of metal sites and metal-site structures.

Environmental Pollution↗
PubMed2006

Soil remediation by an advanced oxidative method assisted with ultrasonic energy.

A new process for the remediation of soil contaminated with hydrocarbons is proposed. The innovation consists on coupling an advanced oxidative method, using a Fenton-type catalyst, with the application of ultrasonic energy. The use of ultrasonic energy not only assists the desorption of the contaminants from the soil, but also promotes the formation of OH radicals, which are the oxidant agents involved in the oxidation process. Different Fenton-like catalysts were employed in the present study; however, the highest removal of toluene and xylenes were obtained with iron sulfate and copper sulfate, respectively. Also, hydrogen peroxide was tested at different concentrations, and it was found that increasing its concentration enhanced the removal of all the contaminants. Finally, it was demonstrated that applying ultrasonic energy to the reacting system process noticeably enhanced the global efficiency of the process due to a synergistic effect in conjunction with the hydrogen peroxide concentration and type of catalyst.

Environmental Pollution↗