PubMed Health⌕ Search

PubMed · 15565705

Recent developments in detection for microfluidic systems.

Abstract

Microfluidic systems have become more and more important in the field of analytical chemistry. Detection methods on these microsystems are essential for the identification and quantification of chemical species that are being analyzed. This review concentrates on the latest developments of optical detection methods and mass spectrometry in conjunction with microfluidic systems. Electrochemical methods are discussed in another review in the same issue of this journal. Within the optical detection section, topics such as multiplexed detection and the use of waveguides are discussed. Within the discussion of mass spectrometry, the main focus is on electrospray emitters as interfaces between microsystem and spectrometer. Apart from optical detection and mass spectrometry, other techniques such as flame ionization and nuclear magnetic resonance are also mentioned.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Klaus B Mogensen, Henning Klank, Jörg P Kutter. 2004. Recent developments in detection for microfluidic systems.. https://doi.org/10.1002/elps.200406108

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Thermo-chemical destruction of polychlorinated biphenyls (PCBs) in waste insulating oil.

The feasibility of thermo-chemical destruction of polychlorinated biphenyls (PCBs) was investigated using a batch reactor and two different (vertical and horizontal) types of continuous reactor. A simple batch reactor was first designed and constructed to examine applicability of thermal-chemical destruction of PCBs. It was evidenced from the batch test results that the destruction of PCBs in the insulating oil (40% PCBs, w/w) was accomplished via abiotic dechlorination and mineralization of PCBs with quicklime at 600 degrees C under nitrogen environment. PCB destruction efficiencies were obtained about 99.95%. The reaction was exothermic resulting release of heat by which the reactor temperature suddenly increased up to 750 degrees C at the incipient 30 min of the experiment. Two major end products, CaCl2 and carbon, were identified. For a practical purpose, two continuous reactors were developed and tested. The observed continuous test results indicate that over 99.99% of PCB destruction efficiencies were achieved when excess quicklime (>3Ca:1Cl2 as a molar basis) was used. Specifically, the horizontal continuous reactor was suitable in view of ease of solid transfer, which is essential for complete destruction of PCBs and for full-scale applications.

Equipment Design↗