PubMed Health⌕ Search

PubMed · 16252750

Laser-tweezer-controlled solid immersion microscopy in microfluidic systems.

Abstract

We describe the creation and implementation of a near-field scanning solid immersion microscope that is specifically tailored for use in microfluidic systems. The microscope comprises a newly fabricated Weierstrass solid immersion lens (SIL), which is detached from its substrate and is free floating in the fluid, and a laser optical tweezer, which serves both as a trapping beam for alignment and positioning of the SIL and as a near-field scanning beam that images the sample through the SIL. A discussion of the SIL's fabrication method is presented along with experimental results that demonstrate the effectiveness of our microscope design.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Aaron L Birkbeck, Sanja Zlatanovic, Sadik C Esener, Mihrimah Ozkan. 2005-10-15. Laser-tweezer-controlled solid immersion microscopy in microfluidic systems.. https://doi.org/10.1364/ol.30.002712

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Combined confocal/en face T-scan-based ultrahigh-resolution optical coherence tomography in vivo retinal imaging.

Combined confocal scanning ophthalmoscopy/en face T-scan-based ultrahigh-resolution optical coherence tomography (OCT) of the human retina in vivo is reported for the first time to our knowledge. The system uses a superluminescent diode-based broadband source, which gives an axial resolution of 3.2 microm in the retina. We demonstrate acquisition of T-scan-based OCT B-scan and simultaneous confocal/C-scan images of the human retina of large lateral size (covering a field of up to 20 degrees ) at a frame rate of 2Hz.

Equipment Design↗

Spectrally encoded slit confocal microscopy.

A simple and cost-effective method for real-time imaging in confocal microscopy is proposed. Spectrally encoded slit confocal microscopy (SESCoM) uses a spectral encoding technique together with a confocal slit aperture to achieve two-dimensional images. Simulation and experimental results of the SESCoM's axial and lateral performances are presented. The measured FWHM of the axial response is 1.15 mum when an objective with a NA of 0.95 is used. FWHMs of the lateral line spread functions are measured to be 236 and 244 nm along the x and y directions, respectively. Both the axial and the lateral experimental results agree well with the simulation results.

Equipment Design↗

Evanescent Bessel beam generation via surface plasmon resonance excitation by a radially polarized beam.

A simple setup for generating evanescent Bessel beams is proposed. When a radially polarized beam is strongly focused onto a dielectric-metal interface, the entire beam is p-polarized with respect to the dielectric-metal interface, enabling excitation of surface plasmons from all directions. The angular selectivity of surface plasmon excitation mimics the function of an axicon, leading to an evanescent nondiffracting Bessel beam. The created evanescent Bessel beam may be used as a virtual probe for near-field optical imaging and sensing applications.

Equipment Design↗