PubMed Health⌕ Search

PubMed · 16289127

Coupling between electroosmotically driven flow and bipolar faradaic depolarization processes in electron-conducting microchannels.

Abstract

A quantitative theory is proposed for the analysis of steady electroosmotically driven flows within conducting cylindrical microchannels. Beyond a threshold value of the electric field applied in the electrolyte solution and parallel to the conducting surface, electrochemical oxidation and reduction reactions take place at the two extremities of the substrate. The spatial distribution of the corresponding local faradaic currents along the bipolar electrode is intrinsically coupled to that of the electric field in solution. The nonuniform distribution of the electric field alters the double layer composition, and in particular the zeta-potential value, along the conducting surface via the occurrence of concomitant electronic and ionic double layer charging processes. The combined spatial dependencies of the lateral electric field and electrokinetic potential considerably affects the distribution of the electroosmotic velocity field in the directions parallel and perpendicular to the surface depolarized by faradaic processes. In this paper, the coupling between bipolar electrodic behavior and electroosmosis is explicitly investigated for the case of irreversible--that is, kinetically controlled--electron transfer reactions. Typical simulation results are presented and illustrate the possibility of controlling and optimizing electroosmotic flows in conducting channels by electrochemical means.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Shizhi Qian, Jérôme F L Duval. 2005-11-09. Coupling between electroosmotically driven flow and bipolar faradaic depolarization processes in electron-conducting microchannels.. https://doi.org/10.1016/j.jcis.2005.09.069

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Advanced oxidation processes for the treatment of olive-oil mills wastewater.

In this work, the treatment of an actual industrial waste with three advanced oxidation processes (AOP) has been studied: conductive-diamond electrooxidation (CDEO), ozonation and Fenton oxidation. The wastewater comes from olive-oil mills (OMW) and contains a COD of nearly 3000 mg dm(-3). CDEO allowed achieving the complete mineralization of the waste with high current efficiencies. Likewise, both ozonation and Fenton oxidation were able to treat the wastes, but they obtained very different results in terms of efficiency and mineralization. The accumulation of oxidation-refractory compounds as final products excludes the use of ozonation and Fenton oxidation as a sole treatment technology. This confirms that besides the hydroxyl-radical mediated oxidation, CDEO combines other important oxidation processes such as the direct electro-oxidation on the diamond surface and the oxidation mediated by other electrochemically formed compounds generated on this electrode.

Electrochemistry↗

Electrosynthesis of hydrogen peroxide via the reduction of oxygen assisted by power ultrasound.

The electrosynthesis of hydrogen peroxide using the oxygen reduction reaction has been studied in the absence and presence of power ultrasound in a non-optimized sono-electrochemical flow reactor (20 cm cathodic compartment length with 6.5 cm inner diameter) with reticulated vitreous glassy carbon electrode (30 x 40 x 10 mm, 10 ppi, 7 cm(2)cm(-3)) as the cathode. The effect of several electrochemical operational variables (pH, volumetric flow, potential) and of the sono-electrochemical parameters (ultrasound amplitude and horn-to-electrode distance) on the cumulative concentration of hydrogen peroxide and current efficiency of the electrosynthesis process have been explored. The application of power ultrasound was found to increase both the cumulative concentration of hydrogen peroxide and the current efficiency. The application of ultrasound is therefore a promising approach to the increased efficiency of production of hydrogen peroxide by electrosynthesis, even in the solutions of lower pH (<12). The results demonstrate the feasibility of at-site-of-use green synthesis of hydrogen peroxide.

Electrochemistry↗