Microbial biomass estimation.

R E Madrid; C J Felice

doi:10.1080/07388550500248563

Home/Archive/PubMed

PubMed · 16294829

Microbial biomass estimation.

R E Madrid·C J Felice

View original source ↗Export metadata ↓

Abstract

The development of a fully automated on-line monitoring and control system is very important in bioprocesses. One of the most important parameters in these processes is biomass. This review discusses different methods for biomass quantification. A general definition of biomass and biovolume are presented. Interesting concepts about active but not culturable cells considerations are included as well as concepts that must be taken into account when selecting biomass quantification technology. Chemical methods have had few applications in biomass measurement to date; however, bioluminescence can selectively enumerate viable cells. Photometric methods including fluorescence and scattered light measurements are presented. Reference methods including dry and wet weight, viable counts and direct counts are discussed, as well as the physical methods of flow cytometry, impedancimetric and dielectric techniques.

Explore related subjects

Biomass Biosensing Techniques Colony Count, Microbial Flow Cytometry Microscopy, Fluorescence Photometry Journal Article Review

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

R E Madrid, C J Felice. Microbial biomass estimation.. https://doi.org/10.1080/07388550500248563

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2006

High quality biodiesel production from a microalga Chlorella protothecoides by heterotrophic growth in fermenters.

The aim of the study was to obtain high quality biodiesel production from a microalga Chlorella protothecoids through the technology of transesterification. The technique of metabolic controlling through heterotrophic growth of C. protothecoides was applied, and the heterotrophic C. protothecoides contained the crude lipid content of 55.2%. To increase the biomass and reduce the cost of alga, corn powder hydrolysate instead of glucose was used as organic carbon source in heterotrophic culture medium in fermenters. The result showed that cell density significantly increased under the heterotrophic condition, and the highest cell concentration reached 15.5 g L(-1). Large amount of microalgal oil was efficiently extracted from the heterotrophic cells by using n-hexane, and then transmuted into biodiesel by acidic transesterification. The biodiesel was characterized by a high heating value of 41 MJ kg(-1), a density of 0.864 kg L(-1), and a viscosity of 5.2 x 10(-4) Pa s (at 40 degrees C). The method has great potential in the industrial production of liquid fuel from microalga.

Biomass↗

PubMed2006

Proof-of-concept of a novel micro-bioreactor for fast development of industrial bioprocesses.

The experimental performance of a novel micro-bioreactor envisaged for parallel screening and development of industrial bioprocesses has been tested in this work. The micro-bioreactor with an internal volume of 4.5 mL is operated under oscillatory flow mixing (OFM), where a controllable mixing and mass transfer rates are achieved under batch or continuous laminar flow conditions. Several batch fermentations with a flocculent Saccharomyces cerevisiae strain were carried out at initial glucose concentrations (S(0)) range of approximately 5-20 g/L and compared to yeast growth kinetics in a stirred tank (ST) bioreactor. Aerobic fermentations were monitored ex situ in terms of pH, DO, glucose consumption, and biomass and ethanol production (wherever applicable). An average biomass production increase of 83% was obtained in the micro-bioreactor when compared with the ST, with less 93.6% air requirements. It also corresponded to a 214% increase on biomass production when compared with growth in a shaken flask (SF) at S(0) = 20 g/L. Further anaerobic fermentations at the same initial glucose concentration ranges gave the opportunity to use state-of-the-art fiber optics technology for on-line and real-time monitoring of this bioprocess. Time profiles of biomass concentration (measured as optical density (OD)) were very similar in the ST bioreactor and in the micro-bioreactor, with a highly reproducible yeast growth in these two scale-down platforms.

Biomass↗

PubMed2006

Fed-batch mode in shake flasks by slow-release technique.

Most industrial production processes are performed in fed-batch operational mode. In contrast, the screenings for microbial production strains are run in batch mode which results in completely different physiological conditions than relevant for production conditions. This may lead to wrong selections of strains. Silicone elastomer discs containing glucose crystals were developed to realize fed-batch fermentation in shake flasks. No other device for feeding was required. Glucose was fed in this way to Hansenula polymorpha cultures controlled by diffusion. Two strains of H. polymorpha were investigated in shake flasks: the wild-type strain (DSM 70277) and a recombinant strain pC10-FMD (P(FMD)-GFP). The oxygen transfer rate (OTR) and respiratory quotient (RQ) of the cultures were monitored online in shake flasks with a Respiration Activity Monitoring System (RAMOS). Formation of biomass and green fluorescent protein (GFP), pH-drift and the metabolite dynamics of glucose, ethanol and acetic acid were measured offline. With the slow-release technique overflow metabolism could be reduced leading to an increase of 85% in biomass yield. To date, 23.4 g/L cell dry weight of H. polymorpha could be achieved in shake flask. Biomass yields of 0.38-0.47 were obtained which are in the same magnitude of laboratory scale fermentors equipped with a substrate feed pump. GFP yield could be increased by a factor of 35 in Syn6-MES mineral medium. In fed-batch mode 88 mg/L GFP was synthesized with 35.9 g/L fed glucose. In contrast, only 2.5 mg/L with 40 g/L metabolized glucose was revealed in batch mode. In YNB mineral medium over 420-fold improvement in fed-batch mode was achieved with 421 mg/L GFP at 41.3 g/L fed glucose in comparison to less than 1 mg/L in batch mode with 40 g/L glucose.

Biomass↗