PubMed · 16342878
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
A Le Hen, S Pierrefitte. [PACS: web based technology].. https://doi.org/10.1016/s0221-0363(05)81471-4
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
We developed hollow fibers with polycarbonate (PC) capillaries for use as a supporting tube. The PC capillaries were prepared by using a glass-drawing technique. Hollow PC fibers are safer and more flexible than hollow glass fibers because no fragments are released when the fibers are broken in various applications. Inner coating layers of silver and cyclic olefin polymer (COP) enhanced the reflection rate at the Er:YAG laser light wavelength. Using these fibers, we attained low loss for Er:YAG laser light transmission. By adjusting the drawing temperature in the fabrication of the PC capillaries, we created a smooth inner surface and uniform PC capillaries. We also demonstrated low-loss properties for visible pilot beams.
We demonstrate laser-scanning coherent anti-Stokes Raman scattering (CARS) imaging with two excitation laser beams delivered by a large-mode-area photonic crystal fiber. The group-velocity dispersion and self-phase modulation effects are largely suppressed due to the large mode area of the fiber and the use of picosecond pulses. The fiber delivery preserves the signal level and image spatial resolution well. High-quality images of live spinal cord tissues are acquired using the fiber-delivered laser source. Our method provides a basic platform for developing a flexible and compact CARS imaging system.
Light-sheet-based microscopy [single-plane illumination microscope (SPIM)] performs very well at low numerical apertures. It complements conventional (FM), confocal (CFM), and two-photon fluorescence microscopy (2hnu-FM) currently used in modern life sciences. Lateral and axial SPIM point spread function (PSF) extents are measured by using fluorescent beads to determine the 3D resolution. The results are compared with values derived from an analytical theory and numerical simulations. The discrepancies are found to be less than 5%. The axial extent of a SPIM-PSF (10x/0.3 W) is approximately 5.7 microm. This value is almost a factor of 2 smaller than in CFM, more than 2.5 times smaller than in FM, and more than three times smaller than in 2hnu-FM. SPIM outperforms 2hnu-FM and FM, while CFM has a better axial resolution at NAs above 0.8.