PubMed Health⌕ Search
Home/Archive/PubMed

PubMed · 16372079

Reflective thermal lens detection device.

Kazuma Mawatari·Koji Shimoide
View original source ↗Export metadata ↓

Abstract

A reflective thermal lens detection device was developed for realizing a portable and sensitive detector for a microsystem. An aluminum mirror was formed on the main plate of a microchip, and a reflected probe beam was detected with a single pick-up unit. The background signal due to light absorption of the aluminum mirror was 60 times reduced when the microchannel and the mirror were separated with an interval of 600 microm. The tilt angle of the microchip significantly affected the precision of the measurement. Then a quadrant photodiode was used to detect the center of gravity of the reflected probe beam to regulate the tilt angle within +/-0.05 degrees , and this value was enough to achieve 1% CV (coefficient of variance) precision in the measurements. The limit of detection (LOD) was 60 nM for xylene cyanol solution, and the absorbance was 9.4 x 10(-6) AU. About 40 times higher sensitivity was obtained in comparison with a spectrophotometer.

Explore related subjects

AluminumBenzenesulfonatesLab-On-A-Chip DevicesLasersLensesMicroscopy, InterferenceOptics and PhotonicsSensitivity and SpecificitySpectrophotometryTemperatureJournal Article

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Kazuma Mawatari, Koji Shimoide. 2005-12-05. Reflective thermal lens detection device.. https://doi.org/10.1039/b512596k

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2007

Estimates of ambient background concentrations of trace metals in soils for risk assessment.

Site-specific or soil type-specific ambient background concentrations (ABCs) of trace metals in soils are needed for risk assessment. We investigated three different methods for estimating ABCs in soils using a dataset of 5691 soil samples from England and Wales. The concentrations of Co, Cr and Ni were strongly associated with Al and Fe, and multiple regressions explained 62-85% of their variation, and Al and Fe can therefore be used to predict ABCs for these metals. Soil texture had a major influence on the concentrations of Cd, Co, Cr, Cu, Ni and Zn, and the medians were 3-5 fold higher in clayey than in sandy soils. This was used to predict texture-specific ABCs. Lead concentration was higher in acidic peaty soils than in other soils. A probability graph method was used to estimate ABC for Pb in a population of relatively uncontaminated soils. Potential applications of ABCs are discussed.

Aluminum↗
PubMed2007

Quantitative trait loci and candidate gene mapping of aluminum tolerance in diploid alfalfa.

Aluminum (Al) toxicity in acid soils is a major limitation to the production of alfalfa (Medicago sativa subsp. sativa L.) in the USA. Developing Al-tolerant alfalfa cultivars is one approach to overcome this constraint. Accessions of wild diploid alfalfa (M. sativa subsp. coerulea) have been found to be a source of useful genes for Al tolerance. Previously, two genomic regions associated with Al tolerance were identified in this diploid species using restriction fragment length polymorphism (RFLP) markers and single marker analysis. This study was conducted to identify additional Al-tolerance quantitative trait loci (QTLs); to identify simple sequence repeat (SSR) markers that flank the previously identified QTLs; to map candidate genes associated with Al tolerance from other plant species; and to test for co-localization with mapped QTLs. A genetic linkage map was constructed using EST-SSR markers in a population of 130 BC(1)F(1) plants derived from the cross between Al-sensitive and Al-tolerant genotypes. Three putative QTLs on linkage groups LG I, LG II and LG III, explaining 38, 16 and 27% of the phenotypic variation, respectively, were identified. Six candidate gene markers designed from Medicago truncatula ESTs that showed homology to known Al-tolerance genes identified in other plant species were placed on the QTL map. A marker designed from a candidate gene involved in malic acid release mapped near a marginally significant QTL (LOD 2.83) on LG I. The SSR markers flanking these QTLs will be useful for transferring them to cultivated alfalfa via marker-assisted selection and for pyramiding Al tolerance QTLs.

Aluminum↗