[Bone density change simulation by using internal bone remodeling theory and finite element method].

Meiyan An; Aijun Ma

Home/Archive/PubMed

PubMed · 16532811

[Bone density change simulation by using internal bone remodeling theory and finite element method].

Meiyan An·Aijun Ma

View original source ↗Export metadata ↓

Abstract

This paper presents an investigation on the effect of external force on internal bone remodeling by adopting the internal bone remodeling theory in conjunction with finite element method. After the border data are picked from a tomogram, a two-dimensional bone model is formed. The bone remodeling results are obtained by use of the finite element software Ansys. The results agree well with the real structure of bone in some degree, thus demonstrating the validity of the proposed method.

Explore related subjects

Biomechanical Phenomena Bone Density Bone Remodeling Finite Element Analysis Humans Models, Biological Stress, Mechanical Tibia Tomography, X-Ray Computed Journal Article

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Meiyan An, Aijun Ma. 2006. [Bone density change simulation by using internal bone remodeling theory and finite element method].. https://pubmed.ncbi.nlm.nih.gov/16532811/

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2007

Contraction force specificity and its relationship to functional performance.

Best practice for improving strength and power through resistance strength training has been the subject of much research and subsequent conjecture. Much of the conjecture can be attributed to methodological discrepancies. The type of dynamometry used in testing, the training experience of research participants, the specific technique employed in a lift, and the methods of collection and calculation all impact on the final variables of interest. This review examines contraction force specificity by first addressing the methodological issues surrounding our interpretation of the results. Then we address the kinematics and kinetics associated with single and multiple repetitions in relation to the development of strength, power, and functional performance. This discussion provides the delimitations for analysis of subsequent training studies. Finally, recommendations are formulated with the aim of assisting assessment and training practice as well as providing directions for future research. The results of this review suggest that the enhancements in performance resulting from resistance training are context specific in experienced resistance-trained participants. Thus, specific conditioning could be required to achieve improvements in functional performance in this group.

Biomechanical Phenomena↗

PubMed2007

Energy absorption characterization of human enamel using nanoindentation.

Enamel is a natural composite, which has much higher toughness than its major component, crystalline hydroxyapatite. In this study, the energy absorption behavior of human sound enamel was investigated with nanoindentation techniques. A UMIS nanoindenter system as well as a Berkovich and two spherical indenters with nominal tip radii of 5 and 20 microm were used to indent enamel at different loading forces in the direction parallel to enamel prisms. Inelastic energy dissipation versus depth of indenter penetration (U%-h(p) curve) as well as a function of indentation strain (U%-epsilon curve) of enamel was determined. Enamel showed much higher energy absorption capacity than a ceramic material with equivalent modulus (fused silica). Even at the lowest forces (1 mN) for the 20 microm indenter, inelastic response was found. Additional tests done at different force loading rates illustrated that load rate has little influence on P-h response of enamel. The top surface of enamel has the plastic work of indentation of approximately 5.2 nJ/microm(3). The energy absorbing ability is influenced by the very small protein rich component that exists between the hydroxyapatite nanocrystals as well as within the sheath structure surrounding the enamel rods.

Biomechanical Phenomena↗

PubMed2007

Finite element analysis of a transmandibular implant.

Finite element analysis (FEA) was used to study the influence of bony height and baseplate effect on the transmandibular implant (TMI). FEA was used to assess the stress distribution in the mandible, with and without a baseplate. Forces were applied to the center of a bar space. The von Mises stress (SEQV) was displayed in bone, and shear stress also was measured. Tensile stress was always seen at the so-called saddle area; compressive stress was seen at the inferior border. Tensile strain at the saddle area of a 6-mm height mandible is always 9.1 times greater (corresponding to more SEQV) than that of an 18-mm mandible. At same bone heights, saddle area stresses are similar with or without a baseplate. However, stress at the lateral transossseous post interface with bone was significantly different between different bone height groups. Shear stress around the lateral transossseous post was smaller than does the SEQV of the same site. Decreased bone height dramatically increases stress at the saddle area independent of the baseplate presence. These data suggest that bone apposition is found in the severely atrophic mandibles. Thus, there is no need for a baseplate in a slight to mild atrophic mandible.

Biomechanical Phenomena↗