PubMed Health⌕ Search

PubMed · 16623313

Multidetector CT and dentascan software: dosimetric evaluation and technique improvement.

Abstract

PURPOSE: The development of new operative techniques in oral and maxillofacial surgery within the last few years has led to an increasing demand for Dentascan examination, also in paediatric patients. It is necessary to modify acquisition parameters to reduce the absorbed dose. The aim of this study was to define a Dentascan protocol in which a reduced X-ray dose could be used. MATERIALS AND METHODS: Dosimeters were applied to the eyes, mouth, parotid glands, thyroid and back of the neck of an anthropomorphic Plexiglas phantom that underwent multidetector computed tomography (MDCT) Dentascan examinations. Both 120kV and 80 kV were used to study the mandibular and maxillary arches. RESULTS: Examinations obtained with the 80 kV protocol showed a ten-fold reduction in the absorbed dose, without affecting image quality. CONCLUSIONS: We suggest a Dentascan protocol that reduces the X-ray dose administered to the patient while ensuring the same high diagnostic accuracy.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

E Fanucci, M Leporace, G Di Costanzo, V Fiaschetti, G Simonetti. 2006. Multidetector CT and dentascan software: dosimetric evaluation and technique improvement.. https://doi.org/10.1007/s11547-006-0014-7

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Six dimensional analysis with daily stereoscopic x-ray imaging of intrafraction patient motion in head and neck treatments using five points fixation masks.

The safety margins used to define the Planning Target Volume (PTV) should reflect the accuracy of the target localization during treatment that comprises both the reproducibility of the patient positioning and the positional uncertainty of the target, so both the inter- and intrafraction motion of the target. Our first aim in this study was to determine the intrafraction motion of patients immobilized with a five-point thermoplastic mask for head and neck treatments. The five-point masks have the advantage that the patient's shoulders as well as the cranial part of the patient's head is covered with the thermoplastic material that improves the overall immobilization of the head and neck region of the patient. Thirteen patients were consecutively assigned to use a five-point thermoplastic mask. The patients were positioned by tracking of infrared markers (IR) fixed to the immobilization device and stereoscopic x-ray images were used for daily on-line setup verification. Repositioning was carried out prior to treatment as needed; rotations were not corrected. Movements during treatment were monitored by real-time IR tracking. Intrafraction motion and rotation was supplementary assessed by a six-degree-of-freedom (6-D) fusion of x-ray images, taken before and after all 385 treatments, with DRR images generated from the planning CT data. The latter evaluates the movement of the patient within the thermoplastic mask independent from the mask movement, where IR tracking evaluates the movement of the mask caused by patient movement in the mask. These two movements are not necessarily equal to each other. The maximum intrafraction movement detected by IR tracking showed a shift [mean (SD; range)] of -0.1(0.7; 6.0), 0.1(0.6; 3.6), -0.2(0.8;5.5) mm in the vertical, longitudinal, and lateral direction, respectively, and rotations of 0.0(0.2; 1.6), 0.0(0.2; 1.7) and 0.2(0.2; 2.4) degrees about the vertical, longitudinal, and lateral axis, respectively. The standard deviations and ranges found with the 6-D fusion demonstrate intrafraction patient displacements of -0.5(1.2; 7.4), 0.3(0.7; 5.3), 0.0(0.7; 5.7) mm in the vertical, longitudinal, and lateral direction, respectively, and rotations of -0.1(0.6; 4.1), 0.1(0.7; 8.3) and -0.2(0.8; 8.2) degrees about the vertical, longitudinal, and lateral axis, respectively. The 6-D fusions are considerably larger (p < 0.05) than detected by IR tracking. This indicates that the external marker tracking underestimates the magnitude of the actual intrafraction motion and rotation of the patient. The intrafraction motion detected for the patients immobilized with a conventional thermoplastic mask was relatively large. The feasibility to reduce this intrafraction movement by the application of alternative five-point thermoplastic mask types was evaluated as a second aim of this study. The preliminary results showed a clear reduction in the range, being an indication for the random movements, of both the intrafraction shift and rotation for both alternative mask types. The 6-D fusion is found a useful tool for a fast evaluation of the actual patient's intrafraction shift and rotation and shows the latter is not negligible and needs to be taken into account additional to the initial setup accuracy when determining the PTV margin.

Head↗