PubMed · 16702662
A new powder diffractometer for synchrotron radiation with a multiple-detector system.
Abstract
A new powder diffractometer for synchrotron radiation with six detector arms has been constructed. Five detector arms are attached radially at intervals of 25 degrees to the 2theta axis and form a multiple-detector system. Five scintillation counters coupled with flat Ge(111) crystal analyzers on the respective arms can simultaneously record the whole powder pattern divided into five segments, each with an equal 2theta span. The optics design is based on flat-specimen reflection geometry using a parallel beam. The intensity data are collected using a 2theta step-scan technique in asymmetric diffraction at a fixed incident angle. A sixth multi-purpose detector arm can be used in the conventional single-arm scan mode. It can be equipped with various kinds of analyzers such as long horizontal parallel slits, a fiat or channel-cut crystal analyzer, a receiving slit and a solid-state detector. Test operations of the multiple-detector system, conducted at the Photon Factory in Tsukuba, recorded a full width at half maximum of 0.022 degrees and a peak maximum intensity of more than 40000 counts s(-1) for the (111) reflection from Si powder. The whole powder pattern of Mg(2)SiO(4) over a 2theta range of 130 degrees could be step-scanned at a step interval of 0.004 degrees (2theta) in just 4 h. Results of whole-powder-pattern decomposition and Rietveld refinement of the Mg(2)SiO(4) pattern are given.
Explore related subjects
Keep this discovery
Explore connections, maps & timelines
H Toraya, H Hibino, K Ohsumi. 1996-03-01. A new powder diffractometer for synchrotron radiation with a multiple-detector system.. https://doi.org/10.1107/s0909049595015500
Cite the original work for its findings. Save a collection to share your selection of sources.