PubMed Health⌕ Search
Home/Archive/PubMed

PubMed · 16859693

Comparison of headspace and direct single-drop microextraction and headspace solid-phase microextraction for the measurement of volatile sulfur compounds in beer and beverage by gas chromatography with flame photometric detection.

Qin Xiao·Chunhe Yu·Jun Xing·Bin Hu
View original source ↗Export metadata ↓

Abstract

Three approaches based on headspace single-drop microextraction (HS-SDME), direct single-drop microextraction (Direct-SDME), and headspace solid-phase microextraction (HS-SPME), have been compared for analyzing volatile sulphur compounds (VSCs) in beer and beverage. Procedures and performance of the three methods have been contrasted through the determination of extraction efficiencies, precision, linearity and limits of detection. The overall process of HS-SDME and HS-SPME was applied to GC-FPD determination of five VSCs in beer and beverage.

Explore related subjects

BeerBeveragesChromatography, GasFlame IonizationReproducibility of ResultsSulfur CompoundsVolatilizationComparative StudyJournal ArticleResearch Support, Non-U.S. Gov't

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Qin Xiao, Chunhe Yu, Jun Xing, Bin Hu. 2006-07-21. Comparison of headspace and direct single-drop microextraction and headspace solid-phase microextraction for the measurement of volatile sulfur compounds in beer and beverage by gas chromatography with flame photometric detection.. https://doi.org/10.1016/j.chroma.2006.06.096

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2007

Attachment of MAL32-encoded maltase on the outside of yeast cells improves maltotriose utilization.

The fermentation of maltotriose, the second most abundant fermentable sugar in wort, is often incomplete during high-gravity brewing. Poor maltotriose consumption is due to environmental stress conditions during high-gravity fermentation and especially to a low uptake of this sugar by some industrial strains. In this study we investigated whether the use of strains with an alpha-glucosidase attached to the outside of the cell might be a possible way to reduce residual maltotriose. To this end, the N-terminal leader sequence of Kre1 and the carboxy-terminal anchoring domain of either Cwp2 or Flo1 were used to target maltase encoded by MAL32 to the cell surface. We showed that Mal32 displayed on the cell surface of Saccharomyces cerevisiae laboratory strains was capable of hydrolysis of alpha-1,4-linkages, and that it increased the ability of a strain lacking a functional maltose permease to grow on maltotriose. Moreover, the enzyme was also expressed and found to be active in an industrial strain. These data show that expressing a suitable maltase on the cell surface might provide a means of modifying yeast for more complete maltotriose utilization in brewing and other fermentation applications.

Beer↗
PubMed2006

Isolation and characterization of brewer's yeast variants with improved fermentation performance under high-gravity conditions.

To save energy, space, and time, today's breweries make use of high-gravity brewing in which concentrated medium (wort) is fermented, resulting in a product with higher ethanol content. After fermentation, the product is diluted to obtain beer with the desired alcohol content. While economically desirable, the use of wort with an even higher sugar concentration is limited by the inability of brewer's yeast (Saccharomyces pastorianus) to efficiently ferment such concentrated medium. Here, we describe a successful strategy to obtain yeast variants with significantly improved fermentation capacity under high-gravity conditions. We isolated better-performing variants of the industrial lager strain CMBS33 by subjecting a pool of UV-induced variants to consecutive rounds of fermentation in very-high-gravity wort (>22 degrees Plato). Two variants (GT336 and GT344) showing faster fermentation rates and/or more-complete attenuation as well as improved viability under high ethanol conditions were identified. The variants displayed the same advantages in a pilot-scale stirred fermenter under high-gravity conditions at 11 degrees C. Microarray analysis identified several genes whose altered expression may be responsible for the superior performance of the variants. The role of some of these candidate genes was confirmed by genetic transformation. Our study shows that proper selection conditions allow the isolation of variants of commercial brewer's yeast with superior fermentation characteristics. Moreover, it is the first study to identify genes that affect fermentation performance under high-gravity conditions. The results are of interest to the beer and bioethanol industries, where the use of more-concentrated medium is economically advantageous.

Beer↗
PubMed2006

RNA-based sandwich hybridisation method for detection of lactic acid bacteria in brewery samples.

Recently we showed the applicability and sensitivity of the RNA-based sandwich hybridisation assay (SHA) for detection of gram-negative cells in environmental samples [Leskelä, T., Tilsala-Timisjärvi, A., Kusnetsov, J., Neubauer, P., Breitenstein, A., 2005. Sensitive genus-specific detection of Legionella by a 16S rRNA based sandwich hybridization assay. J. Microbiol. Met. 62, 167-179.]. In this study the aim was to test and optimise this method for the detection of gram-positive cells from brewery yeast slurries that contain up to 10(9) yeast cells/ml. Eleven new oligonucleotide probes were designed for group-specific detection of different beer-spoiling lactic acid bacteria of the genera Lactobacillus and Pediococcus. Functionality of the designed probes was shown by testing individual and paired probes using in vitro transcribed 16S rRNA and crude cell extracts as samples. Various simple and fast cell disruption methods were evaluated for the efficient disruption of lactobacilli and pediococci. The applicability of the designed oligonucleotide probes and the SHA for detection of brewery contaminants was demonstrated using both artificial and actual yeast slurry samples from brewery fermentation tanks with either fluorimetric readout or an electric biochip analyser.

Beer↗