Detection of palladium by cold atom solution atomic absorption.

Abstract

One of the largest obstacles in miniaturizing traditional atomic spectroscopic sources is the need for a thermal/electrical source for free atom production. A single article in the literature has demonstrated atomic absorption detection of Ag, Cu, and Pd in solution at room temperature for atoms in the gas phase, which may ultimately permit miniaturization. Unfortunately, several laboratories have found that reproducing the phenomenon has been difficult. Without a sound fundamental explanation of the processes leading to the signal, one must conclude that it can be done, but some unsuspected and unknown design/methodological nuances are responsible for only a single reported success. Gas phase atoms could exist at room temperature "in solution" if the atoms were trapped in very small bubbles. In the current study, submicrometer-sized bubbles were created in a flow-through cell during the mixing of an alcohol-water solution containing a reducing agent with water containing the analyte. A repeatable atomic absorption signal was produced. Replacement of ethanol with 1-propanol and use of a surfactant increased the signal. Limits of detection of approximately 100 ppb in Pd were achieved, and it is estimated that approximately 0.4% of the Pd initially added is contained within the bubbles as gaseous atoms. The paper discusses the fundamental processes needed to achieve a repeatable signal.