PubMed Health⌕ Search
Home/Archive/PubMed

PubMed · 1722382

Calcium determination in primary hyperparathyroidism.

J H Ladenson
View original source ↗Export metadata ↓

Abstract

Calcium is the most closely controlled substance in the blood. The biologic variation of total calcium is approximately 2% and of the biologically active free (ionized, ionic) calcium only 1%. Thus, the monitoring of calcium in blood requires analytic procedures of high precision and accuracy. For patients with asymptomatic primary hyperparathyroidism, calcium monitoring involves the measurement of total calcium and free calcium. This review first considers the measurement of total calcium and then free calcium.

Explore related subjects

Arsenazo IIICalciumColoring AgentsEdetic AcidHumansHyperparathyroidismPhenolphthaleinsReference ValuesSensitivity and SpecificityStaining and LabelingJournal ArticleReview

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

J H Ladenson. 1991. Calcium determination in primary hyperparathyroidism.. https://doi.org/10.1002/jbmr.5650061411

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2006

A microchip sensor for calcium determination.

A newly designed glass-PDMS microchip-based sensor for use in the determination of Ca(2+) ions has been developed, utilizing reflectance measurements from arsenazo III (1,8-dihydroxynaphthalene-3,6-disulfonic acid-2,7-bis[(azo-2)-phenyl arsenic acid]) immobilized on the surface of polymer beads. The beads, produced from cross-linked poly(p-chloromethylstyrene) (PCMS), were covalently modified with polyethylenimine (PEI) to which the Arsenazo III could be adsorbed. The maximum amount of Arsenazo III which could be immobilized onto the PEI-attached PCMS beads was found to be 373.71 mg g(-1) polymer at pH 1. Once fabricated, the beads were utilized at the detection point of the microfluidic sensor device with a fiber optic assembly for reflectance measurements. Samples were mobilized past the detection point in the sensor where they interact with the immobilized dye. The sensor could be regenerated and re-used by rinsing with HCl solution. The pH, voltage, linear range, and the effect of interfering ions were evaluated for Ca(2+) determination using this microchip sensor. At the optimum potential, 0.8 kV, and pH 9.0, the linear range of the microchip sensor was 3.57 x 10(-5) - 5.71 x 10(-4) M Ca(2+), with a limit of detection (LOD) of 2.68 x 10(-5) M. The microchip biosensor was then applied for clinical analysis of calcium ions in serum with good results.

Arsenazo III↗
PubMed2005

Study on the binding of Arsenazo-TB to human serum albumin by Rayleigh light scattering technique and FT-IR.

The interaction between Arsenazo-TB and human serum albumin (HSA) was studied by Rayleigh light scattering (RLS) technique and Fourier transformed IR (FT-IR). The binding parameters of Arsenazo-TB with HSA were studied at different temperature of 288, 298, 308, 318 K under the optimum conditions. It is indicated by the Scatchard plots that the binding constant K decreased from 5.03 x 10(7) to 7.13 x 10(6) and the maximum binding number N reduced from 53 to 36 with the increasing of the temperature. The binding process was exothermic, enthalpy driven and spontaneous, as indicated by the thermodynamic analyses, and the major part of the binding energy is hydrophobic interaction. The free energy change deltaG0, the enthalpy change deltaH0 and the entropy change deltaS0 of 288 K were calculated to be -42.46 kJ/mol, -49.17 kJ/mol and 318.15 J/mol K, respectively. The alterations of protein secondary structure in the presence of Arsenazo-TB in aqueous solution were quantitatively calculated from FT-IR spectroscopy with reductions of alpha-helix from 57% to 40% and with increases of beta-sheet from 36% to 39%, beta-turn from 7% to 21%.

Arsenazo III↗
PubMed2005

Application of cause-and-effect analysis to potentiometric titration.

A first attempt has been made to interpret physicochemical data from potentiometric titration analysis in accordance with the complete measurement-uncertainty budget approach (bottom-up) of ISO and Eurachem. A cause-and-effect diagram is established and discussed. Titration data for arsenazo III are used as a basis for this discussion. The commercial software Superquad is used and applied within a computer-intensive resampling framework. The cause-and-effect diagram is applied to evaluation of seven protonation constants of arsenazo III in the pH range 2-10.7. The data interpretation is based on empirical probability distributions and their analysis by second-order correct confidence estimates. The evaluated data are applied in the calculation of a speciation diagram including uncertainty estimates using the probabilistic speciation software Ljungskile.

Arsenazo III↗