PubMed Health⌕ Search
Home/Archive/PubMed

PubMed · 1824242

Study on multiple-enzyme electrode for sucrose determination.

W Hu·X Zhang·S Hu
View original source ↗Export metadata ↓

Abstract

Invertase (INV), mutarotase (MUT), glucose oxidase (GOD) and BSA were coimmobilized via glutaraldehyde-bridged covalent bonding, and directly absorbed on the teflon membrane. This membrane was covered with a nylon mesh and placed over an oxygen electrode. An enzyme electrode for flow injection analysis system (EFIA) was adopted. The optimum enzyme composition (IU) for immobilization on the teflon membrane of INV-MUT-GOD was found to be in the ratio 72:48:2.4, with a recovery activity INV-MUT of more than 42.9%. pH 5.8-6.5 was the most suitable range of acidity for the sensor activity. The optimum temperature was 35-45 degrees C. The system exhibited good linearity in the range of 5 x 10(-4) approximately 10(-1) M sucrose (kinetic method) and 10(-5) approximately 2 x 10(-3) M sucrose (steady state method), in short response time (20 seconds for kinetic method, 2 minutes for steady state method), CV = 1.7% (kinetic method). The sensor had been used for determining sucrose concentration in fermentation broth, with an average recovery rate of 98%. The interference caused by the presence of glucose derived from decomposition of sucrose was eliminated by calibration with a GOD sensor. No significant loss of the enzyme electrode activity was observed after 120 hours of the continuous flow of fresh 1 mM sucrose. The multiple-enzyme membrane showed a relatively long lifetime (compared with 14 hours as reported previously) and good storage stability (30 days, stored in distilled water at 4 degrees C).

Explore related subjects

Biosensing TechniquesCalibrationCarbohydrate EpimerasesElectrodesEnzyme StabilityEnzymes, ImmobilizedGlucose OxidaseGlycoside HydrolasesHydrogen-Ion ConcentrationKineticsMembranes, ArtificialOxygenSensitivity and SpecificitySucroseTemperaturebeta-FructofuranosidaseJournal Article

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

W Hu, X Zhang, S Hu. 1991. Study on multiple-enzyme electrode for sucrose determination.. https://pubmed.ncbi.nlm.nih.gov/1824242/

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2026

From host response to genomic targets: electrochemical biosensing of tuberculosis biomarkers.

Tuberculosis (TB) remains one of the leading causes of death from a single infectious agent worldwide, with timely diagnosis continuing to be a major challenge, particularly in resource-limited settings. Conventional TB diagnostic methods are limited by low sensitivity, long turnaround times, and an inability to reliably differentiate latent from active disease. Biomarker-based diagnostic strategies have therefore gained increasing attention as they offer the potential to improve early detection, disease differentiation, and treatment monitoring. Herein, we examine electrochemical biosensing strategies for TB diagnostics using a biomarker-class-driven framework, covering host-response biomarkers (IFN-γ and TNF-α), pathogen-derived antigens (ESAT6, CFP10, CFP10-ESAT6, MPT64, Ag85, HspX and LpqH), cell-wall signatures and whole-cell markers (LAM and whole cell Mtb), and genomic markers (Mtb DNA and IS6110). Through structured comparison of recognition elements, biointerface designs, signal amplification strategies, electrochemical techniques, matrices, and validation levels, this review identifies the most promising technical approaches for different TB biomarker classes. It further highlights key translational bottlenecks, including limited clinical validation, buffer-based testing, complex multistep amplification, redox-probe dependence, matrix fouling, and insufficient evidence of manufacturability. This review therefore provides practical guidance for developing electrochemical TB biosensors that are analytically sensitive, clinically relevant, and suitable for decentralized diagnostic applications.

Biosensing Techniques↗
PubMed2026

Metal-organic frameworks nanozyme-integrated portable microneedle patch for visual bacterial monitoring in meat.

Foodborne microbial contamination is a major global health concern, with conventional methods often being time-consuming and complex. Herein, we developed a novel portable biosensor by integrating microneedle patch technology and a metal-organic framework (Fe/Cu-NBDC MOF) nanozyme, enabling rapid, on-site, visual detection of bacteria in meat. The sensing system works by encapsulating aptamer-functionalized MOF nanozymes within a hydrogel patch, where their catalytic sites are initially blocked by the aptamer. In the presence of Staphylococcus aureus (S. aureus) as the target, the specific aptamer's binding to bacteria exposes numerous catalytic sites, further activating the chromogenic reaction of the tetramethylbenzidine‑hydrogen peroxide (TMB-H₂O₂) system, enabling visual detection of S. aureus. The biosensor demonstrates a detection limit of 82 CFU/mL with excellent specificity to successfully apply to commercial mutton. By integrating sampling, enrichment, and visual detection into a single compact device, this platform offers a practical, efficient solution for rapid on-site screening of foodborne pathogens.

Biosensing Techniques↗
PubMed2007

Investigating the molecular mechanisms of in-plane mechanochemistry on cantilever arrays.

Free-standing cantilevers, which directly translate specific biochemical reactions into micromechanical motion, have recently attracted much attention as label-free biosensors and micro/nano robotic devices. To exploit this mechanochemical sensing technology, it is essential to develop a fundamental understanding of the origins of surface stress. Here we report a detailed study into the molecular basis of stress generation in aqueous environments focusing on the pH titration of model mercaptohexadecanoic acid self-assembled monolayers (SAMs), using in situ reference cantilevers coated with nonionizable hexadecanethiol SAMs. Semiautomated data analysis and a statistical model were developed to quantify cyclic deprotonation/protonation reactions on multiple arrays. In-plane force titrations were found to have the sensitivity to detect ionic hydrogen bond formation between protonated and nonprotonated carboxylic acid groups in the proximity of the surface pK1/2, which generated a mean tensile differential surface stress of +1.2 +/- 0.3 mN/m at pH 6.0, corresponding to 1 pN attractive force between two adjacent MHA molecules. Conversely, the magnitude of compressive differential surface stress was found to increase progressively with pH >/= 7.0, reaching a maximum of -14.5 +/- 0.5 mN/m at pH 9.0, attributed to enhanced electrostatic repulsion between deprotonated carboxylic acid groups. However, striking differences were observed in the micromechanical responses to different ionic strength and ion species present in the aqueous environment, highlighting the critical role of counter- and co-ions on surface stress. Our findings provide fundamental insights into the molecular mechanisms of in-plane mechanochemistry, which may be exploited for biosensing and nanoactuation applications.

Biosensing Techniques↗