PubMed · 1843538
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
1991. Removable partial denture alloys.. https://pubmed.ncbi.nlm.nih.gov/1843538/
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
Hydrogen embrittlement of Ni-Ti superelastic alloy in a fluoride solution (0.2% APF) has been investigated by means of a tensile test (after immersion) and hydrogen thermal desorption analysis. Upon immersion, the tensile strength of the alloy decreased to the critical stress level of martensite transformation. Hydrogen desorption of the immersed specimens appeared with a peak at around 500 degrees C. The amount of absorbed hydrogen in the alloy ranged from 100 to 1000 mass ppm when immersed in the fluoride solution for 2 to 24 h. The immersion in the fluoride solution led to the degradation of mechanical properties due to hydrogen embrittlement. The results of the present study imply that one reason that Ti and its alloys fracture in the oral cavity is the fact that hydrogen is absorbed in a fluoride solution, such as prophylactic agents.
OBJECTIVES: To study the microstructure of a palladium-free gallium-based alloy (Galloy) before and after mixing to identify the metallic phases produced by the setting reaction and assess the quantitative elemental analysis of the phases present. METHODS: The Galloy powder was analyzed using X-ray diffraction (XRD) and scanning electron microscopy (SEM) and the particle size distribution was determined using a high resolution particle size analyzer. Cylindrical test specimens were mechanically condensed in accordance with ISO 1559: 1986 for XRD, energy dispersive spectroscopy (EDS) and SEM analyses of the set alloy. Disc shaped specimens were prepared by manual condensation to compare the width of the reaction zone with specimens condensed mechanically. RESULTS: The Galloy powder consisted of spherical particles varying between 0.1 and 40 microm in diameter which contained a network of grooves and clefts extending deep within the substance of the particles. The reaction zone appeared 'grainy' and 'fragmented' compared with the well defined reaction zone previously observed for Pd-containing gallium-based alloys. The student t-test indicated the width of reaction zone varied significantly (P<0.001) with method of specimen fabrication.Significance. The significantly larger reaction zone in the manually condensed specimens was possibly due to failure of the condensation technique to force out excessive liquid alloy present in the triturated mass. The surface topography of the Pd-free Galloy powder particles could be responsible for the characteristically fragmented and ill-defined reaction zone observed in the set material compared with the well defined reaction zone previously observed for Pd-containing gallium-based alloys.
With the price volatility of palladium, there has been renewed interest in palladium-silver alloys for metal-ceramic restorations in dentistry. The microstructures of a popular Pd-Ag dental alloy were investigated in the as-cast and simulated porcelain-firing heat-treated conditions, using transmission electron microscopy. In the as-cast condition, the microstructure was strongly influenced by microsegregation, and contained the face-centered cubic Pd solid solution matrix, a eutectic structure with lattice parameters that varied for the two phases, and a face-centered tetragonal (fct) precipitate. After heat treatment, the lattice parameters for the two phases in the eutectic structure were uniform, and discontinuous precipitates with [011](matrix) habit planes and dislocations appeared in the matrix. An unusual nanostructured constituent was found in the fct set of eutectic lamellae in the heat-treated alloys.