[Dentin pins: risk evaluation and precautions].

Y Caux; R Husson; M Maquin

PubMed · 2634868

[Dentin pins: risk evaluation and precautions].

Abstract

When large restorations are necessary, self screw-cutting dentinal pits are very useful auxiliaries. The main risks encountered during their utilization are: --perforation through periodontium--pulpal wound--dentinal cracks--weakness of mechanical properties of restorative material--corrosion--breakdown of the drill--pulpal warning up--unesthetical front restorations. The way to prevent those difficulties are: --precise clinical and radiological examinations--insertion point--direction--number--composition--choice of pits.

Explore related subjects

Corrosion Dental Pins Dental Restoration, Permanent Dentin Humans English Abstract Journal Article

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Y Caux, R Husson, M Maquin. [Dentin pins: risk evaluation and precautions].. https://pubmed.ncbi.nlm.nih.gov/2634868/

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2007

Categorizing nasal septal perforations of occupational origin as cases of corrosive rhinitis.

BACKGROUND: In clinical practice a perforation of the nasal septum secondary to an occupational exposure to corrosive chemicals is not considered a sequel of rhinitis. METHODS: Relevant articles published in the last 26 years were searched and retrieved from PubMed. RESULTS: Patients with nasal septal perforations of occupational origin show a history of rhinitis with a gradual installation of symptoms and damage of the nasal mucosa progressing to ulceration and ultimately to perforation of the nasal septum. CONCLUSION: Patients with nasal septal perforations of occupational origin exhibit the clinical and histopathological features of rhinitis whereby they should be categorized as rhinitics. This rhinitis should be considered as a type of irritant-induced occupational rhinitis and classified as corrosive rhinitis.

Corrosion↗

PubMed2007

The corrosion of nickel-titanium rotary endodontic instruments in sodium hypochlorite.

AIM: To evaluate the corrosion resistance of nickel-titanium (NiTi) endodontic rotary instruments immersed in 5.25% sodium hypochlorite (NaOCl) solution. METHODOLOGY: The corrosion performance of NiTi instruments (S1 25 mm, ProTaper Dentsplay Maillefer, Ballaigues, Switzerland) was evaluated using commercial 5.25% NaOCl solution (pH = 12.3), and the same solution partially neutralized adding H2SO4 to reach pH = 10.1. Electrochemical measurements were carried out using a potentiostat equipped with a five-channel zero resistance ammeter (ZRA) for galvanic current measurements. The instruments were sectioned into three parts (cutting part, noncutting part and shank) and degreased with acetone and rinsing with demineralized water prior to being immersed in NaOCl solution for testing. Each set of the three parts constituted one 'virtual' instrument through the ZRA, giving access to the galvanic currents that circulate between the three parts. Nine instruments were employed to check the reproducibility of the electrochemical measurements. RESULTS: The corrosion potential (E(corr)) of the NiTi alloy reached the passive domain in approximately 20 s of immersion in the solution having a pH 10.1. After this initial period the potential remained steady, indicating that stable passivation was achieved. However, at pH 12.3 no stationary state was achieved even after 6000 s of immersion time. Thus, the alloy was not stable in this medium from a corrosion point of view. CONCLUSIONS: The corrosion resistance of NiTi alloy was enhanced by lowering the pH of NaOCl solution to 10.1, which allows the system to reach the stability domain of the passivating species TiO2 and NiO2.

Corrosion↗

PubMed2006

Corrosion resistance measurements of dental alloys, are they correlated?

OBJECTIVES: The aim was to assess in vitro the resistance to corrosion of eight commercial dental alloys by two quantitative methods, electrochemical and immersion tests, then to statistically test the hypothesis of possible correlation between the polarization resistance (R(p)) and the elemental release. METHODS: Two quantitative methods; electrochemical and immersion test, were used. From the first, after recording the OCP during 24h immersion in acidified artificial saliva (pH 2.3), R(p) was obtained using the linear polarization in anodic path and applying the Mansfeld's method. From the static immersion test, using the same test solution, the elemental release from was analysed and determined using the ICP-AES. Thereafter, the two measurements were used to plot the regression line and to determine the correlation coefficient. The significance of the correlation was tested using F-test at a confidence interval of 0.99. RESULTS: : The resistance to corrosion results obtained from the two methods were ranked and compared; an inverse relation between them was evident. Then, the obtained coefficient of correlation (R(2)) was 0.886. With the F-test at 0.99 confidence interval, the hypothesis was accepted as the calculated F was about 44 against critical F=13.7. CONCLUSION: The correlation between the two measurements, R(p) and mass loss, was proved statistically significant. This result may provide a new approach to predict the corrosion behaviour of dental alloys by firstly using the easier methods.

Corrosion↗