PubMed · 265764
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
J Kyselová. 1977. [New amalgam alloys].. https://pubmed.ncbi.nlm.nih.gov/265764/
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
The frequency of side-effects among dental patients is very low and is seen mostly as mild allergic reactions. Among the dental staff, contact allergic eczema is occasionally seen, induced by certain metals and various organic materials.
An in vitro evaluation of abrasive wear resistance of high-strength denture (HS) teeth and wear of metal plates (Pd alloy) on the opposing side was conducted. A total of 8 types of teeth were used in the experiments including 3 types of HS teeth, 3 types of conventional plastic denture (PL) teeth, porcelain teeth and metal teeth (Pd alloy). Sliding-induced wear tests were conducted by sliding these teeth over the metal plates. Abrasive wear resistance of the teeth was evaluated in terms of wear depth and weight loss. A comparison of wear depth showed that the abrasive wear resistance of HS teeth was 4.7 times that of PL teeth, 0.7 times that of porcelain teeth and 8.3 times that of metal teeth. Weight loss showed that the abrasive wear resistance of HS teeth was 3.3 times that of PL teeth, 0.2 times that of porcelain teeth and 11.4 times that of metal teeth. The weight loss of the metal plates was minimal when they slid over HS teeth, but increased in the order PL teeth, porcelain teeth and metal teeth.
The influence of composition and purity of titanium on the mechanical properties and the transformation temperatures of Ni-Ti alloy dental castings was investigated by tensile testing and differential scanning calorimetry (DSC). The compositions of the ingots were 49.0-49.2 at% of titanium content. Three grades of titanium of relatively high purity were used as starting materials. The result showed Ni-49.0Ti to be a somewhat brittle property, and Ni-49.2Ti to have low apparent proof strength and large elongation. Residual strain increased with increasing titanium content. Even small reductions of titanium purity influenced the tensile properties and the transformation temperatures, causing high apparent proof strength, low residual strain and low elongation because of the reduction in transformation temperatures.