PubMed Health⌕ Search
Home/Archive/PubMed

PubMed · 2673204

Biomedical engineering in the early U.S. aerospace program.

W Greatbatch
View original source ↗Export metadata ↓

Abstract

Much of the bioinstrumentation in the early U.S. aerospace program in the 1950's was undertaken by the U.S. Air Force, first at Randolph Field, TX, and then at Brooks AFB, TX. We document here some of the equipment and some of the experiences encountered by the early experimenters. This period coincided with the introduction of solid-state circuitry into biomedical instrumentation and also strongly influenced research into the electrochemical interface between metal electrodes and the ionic body environment. The author recalls much of his own early work, as well as his recollections of some of the other early researchers.

Explore related subjects

Biomedical EngineeringElectronicsHistory, 20th CenturySpace FlightUnited StatesAutobiographyBiographyHistorical ArticleJournal Article

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

W Greatbatch. 1989. Biomedical engineering in the early U.S. aerospace program.. https://pubmed.ncbi.nlm.nih.gov/2673204/

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2007

Optimal design of non-Newtonian, micro-scale viscous pumps for biomedical devices.

The present paper addresses the numerical optimization of geometrical parameters of non-Newtonian micro-scale viscous pumps for biomedical devices. The objective is to maximize the mass flow rate per unit of shaft power consumed by the rotor when an external pressure load is applied along the channel that houses the rotor. Two geometric parameters are considered in the optimization process: (i) the height of the channel that houses the rotor (H) and (ii), the eccentricity (epsilon) of the rotor. Three different micro-scale viscous pump configurations were tested: a straight-housed pump (I-shaped housing) and two curved housed pumps (L- and U-shaped housings). The stress-strain constitutive law is modeled by a power-law relation. The results show that the geometric optimization of micro-scale viscous pumps is critical since the mass flow rate propelled by the rotor is highly dependent on epsilon and H. Numerical simulations indicate that mass flow rate is maximized when epsilon approximately 0, namely when the rotor is placed at a distance of 0.05 radii from the lower wall. The results also show that micro-scale viscous pumps with curved housing provide higher mass flow rate per unit of shaft power consumed when compared with straight-housed pumps. The results are presented in terms optimized dimensions of all three configurations (i.e., H(opt) and epsilon(opt)) and for values of the power-law index varying between 0.5 (shear thinning fluids) and 1.5 (shear-thickening fluids).

Biomedical Engineering↗