High-precision tilt stage for the high-voltage electron microscope.

J N Turner; D P Barnard; G Matuszek; C W See

Home/Archive/PubMed

PubMed · 3238811

High-precision tilt stage for the high-voltage electron microscope.

J N Turner·D P Barnard·G Matuszek·C W See

View original source ↗Export metadata ↓

Abstract

The high-voltage electron microscope is used to study thick samples (0.25 to several micrometers) to obtain three-dimensional information at ultrastructural resolution. Three-dimensional image reconstructions are often employed to extract, process and display this information. The sets of images used to form reconstructions must be recorded for precisely known specimen-beam orientations, especially if tomographic methods are employed. The design and operation of a precision (+/- 0.06 degrees) single-tilt stage to support this type of imaging is reported. All motions including two translations, height adjustment and tilting are accomplished via a single objective lens entry port. The specimen rod is supported on two rubber gaskets for vibration isolation, and motorized precision micrometers with encoder readouts for position monitoring drive the motions. The stage is stable to 0.6 nm for at least 16 s and is capable of tilt angles of +/- 70 degrees.

Explore related subjects

Microscopy, Electron Journal Article Research Support, U.S. Gov't, P.H.S.

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

J N Turner, D P Barnard, G Matuszek, C W See. 1988. High-precision tilt stage for the high-voltage electron microscope.. https://pubmed.ncbi.nlm.nih.gov/3238811/

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2006

In-plane large single-walled carbon nanotube films: in situ synthesis and field-emission properties.

Explore the source record for details and available documents.

Microscopy, Electron↗

PubMed2006

Synthesis of soluble phosphate polymers by RAFT and their in vitro mineralization.

Soluble linear (non-cross-linked) poly(monoacryloxyethyl phosphate) (PMAEP) and poly(2-(methacryloyloxy)ethyl phosphate) (PMOEP) were successfully synthesized through reversible addition-fragmentation chain transfer (RAFT)-mediated polymerization and by keeping the molecular weight below 20 K. Above this molecular weight, insoluble (cross-linked) polymers were observed, postulated to be due to residual diene (cross-linkable) monomers formed during purification of the monomers, MOEP and MAEP. Block copolymers consisting of PMAEP or PMOEP and poly(2-(acetoacetoxy)ethyl methacrylate) (PAAEMA) were successfully prepared and were immobilized on aminated slides. Simulated body fluid studies revealed that calcium phosphate (CaP) minerals formed on both the soluble polymers and the cross-linked gels were very similar. Both the PMAEP polymers and the PMOEP gel showed a CaP layer most probably brushite or monetite based on the Ca/P ratios. A secondary CaP mineral growth with a typical hydroxyapatite (HAP) globular morphology was found on the PMOEP gel. The soluble PMOEP film formed carbonated HAP according to Fourier transform infrared (FTIR) spectroscopy. Block copolymers attached to aminated slides showed only patchy mineralization, possibly due to the ionic interaction of negatively charged phosphate groups and protonated amines.

Microscopy, Electron↗

PubMed2005

Porous structure of natural and modified clinoptilolites.

The evaluation of the pore-size distribution (PSD) of natural and modified mesoporous zeolites, i.e., clinoptilolites is presented. We demonstrate the SEM results showing that the pores of fracture-type from 25-50 nm to 100 nm in size between clinoptilolite grains, as well as pores between crystal aggregates up to 500 nm in size are present in the studied material. The detailed distribution of pore sizes and tortuosity factor of the above-mentioned materials are determined from the adsorption-desorption isotherms of nitrogen measured volumetrically at 77 K. To obtain the reliable pore size distribution (PSD) of the above-mentioned materials both adsorption and desorption branches of the experimental hysteresis loop are described simultaneously by recently developed corrugated pore structure model (CPSM) of Androutsopoulos and Salmas. Evaluated pore size distributions are characterized by well-defined smooth peaks placed in the region of the mesoporosity. Moreover, the mean pore diameter calculated from the classical static measurement of nitrogen adsorption at 77 K correspond very well to the pore diameters from SEM, showing the applicability of the CPSM for characterization of the porosity of natural zeolites. We conclude that classical static adsorption measurements combined with the proper modeling of the capillary condensation/evaporation phenomena are a powerful method which can be applied for pore structure characterization of natural and modified clinoptilolites.

Microscopy, Electron↗