Copper oxide aerosol: generation and characterization.

S M Peoples; J F McCarthy; L C Chen; D Eppelsheimer; M O Amdur

doi:10.1080/15298668891379738

Home/Archive/PubMed

PubMed · 3400592

Copper oxide aerosol: generation and characterization.

S M Peoples·J F McCarthy·L C Chen·D Eppelsheimer·M O Amdur

View original source ↗Export metadata ↓

Abstract

Effluent gases from high temperature systems such as fossil fuel combustion and pyrometallurgical processes contain inorganic material which has the potential to interact with sulfur dioxide (SO2) on the surface of particles to form an irritant aerosol. The submicron fraction of this inorganic material is especially important as the fine particles may penetrate deep into the lung and cause serious health effects. A laboratory furnace was designed to produce a submicrometer copper oxide aerosol to stimulate emissions from copper smelters and other pyrometallurgical operations. The ultimate aim of this research is to investigate the interaction of SO2 and the copper oxide aerosol at different temperatures and humidities in order to determine the reaction products and their potential health effects upon inhalation. The initial work, as presented in this paper, was to reproducibly generate a submicrometer copper oxide aerosol and to characterize it in terms of size, morphology and composition. Two experimental regimes were set up. One admitted filtered air, without water vapor, into the furnace, and the other admitted filtered air and water vapor. The size and morphology of the aerosols were determined using an electrical aerosol analyzer and transmission electron microscopy. The particles appear as chain aggregates with a count median diameter of 0.026 micron when no water vapor was added and 0.031 micron when water vapor was added into the furnace. Composition of the aerosol was determined using x-ray photoelectron spectroscopy. The aerosol, with or without water in the furnace, consists of a mixture of copper(I) oxide and copper(II) hydroxide.

Explore related subjects

Aerosols Copper Humidity Hydroxides Microscopy, Electron Sulfur Dioxide Temperature Journal Article Research Support, U.S. Gov't, P.H.S.

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

S M Peoples, J F McCarthy, L C Chen, D Eppelsheimer, M O Amdur. 1988. Copper oxide aerosol: generation and characterization.. https://doi.org/10.1080/15298668891379738

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2026

Marine air promotes structural compaction and coating growth of soot aerosols after long-range transport from East Asia.

Soot aerosol, a key global warming contributor, undergoes morphological and chemical transformations during atmospheric transport, particularly in humidified marine environments. This study investigates morphology, mixing state, and aging mechanisms of soot particles collected in the Bohai Sea and Yellow Sea. Transmission electron microscopy analyses reveal that coated soot particles dominate the marine atmosphere, accounting for over 98 % of soot-containing particles, with a mean mixing state index (χ) of 0.83. The fractal dimension (Df) of soot particles is 1.84 ± 0.05 in the Northern Yellow Sea, 1.90 ± 0.08 in the Bohai Sea, and 1.96 ± 0.07 in the Southern Yellow Sea, indicating structural compaction during long-range transport. Correspondingly, the average Dp/Dcore ratios (particle to core size ratio) are 5.3 in the Bohai Sea, 4.2 in the Northern Yellow Sea, and 3.9 in the Southern Yellow Sea. Notably, those ratios are higher in marine environments compared to those observed during continental regional transport from northern to southern China (3.54), suggesting enhanced coating growth in humid marine air. The results highlight the important role of marine atmospheres in accelerating soot aging, which in turn leads to significantly stronger light absorption compared to soot in continental air. Our results highlight the necessity of incorporating compact morphologies, uniform mixing states, and thick coatings into optical models for accurate radiative forcing simulations.

Aerosols↗

PubMed2026

Enhancement of secondary organic aerosol formation from isoprene photooxidation by ammonia.

Ammonia (NH3) can participate in atmospheric secondary organic aerosol (SOA) formation by reacting with organic acids and carbonyl compounds in particle phase, but its influence on the gas phase chemistry remains unclear. This study performed a series of smog chamber experiments to investigate the influence of NH3 on the formation of SOA from isoprene photooxidation by OH radicals. Both gas and particle phase products were measured with a series of state-of- art instruments including a nitrate ion chemical ionization mass spectrometer (nitrate-CIMS) and high-resolution time-of-flight aerosol mass spectrometer (HR-TOF-AMS). Our results showed that in the presence of NH3 SOA in the chamber significantly increased, along with an enhanced oxidation of isoprene. CIMS analysis further showed that NH3 in the chamber homogeneously reacts not only with gas-phase organic acids but also with gaseous low volatility oxygenated organic molecules (OOMs) to generate extremely low volatility and ultralow volatility NH3-OOMs clusters. Quantum chemical calculation showed that NH3 can spontaneously interact with OOMs to form NH3-OOMs clusters by forming hydrogen bonds with RCOOH, R-OOH, and R-OH. These clusters can promote new particles formation and particle growth through nucleation and condensation, directly enhancing the isoprene SOA production with a contribution of 78% to the enhanced SOA. Moreover, the formation of NH3-OOMs clusters also results in more isoprene consumed by OH radicals, indirectly increasing the SOA production with a contribution of 22 % to the enhanced SOA. Our work for the first time clarified a synergetic effect of NH3 on isoprene SOA formation, which should be accounted for by models.

Aerosols↗

PubMed2025

Effects of aerosol aging on composition and light-absorbance of nitrogen-containing organic compounds: Evidences from ultra-high-resolution mass spectrometry analysis.

Nitrogen-containing organic compounds (NOCs) are key components of particulate matter (PM), but their compositional evolution and light-absorbing properties during atmospheric aging remain poorly understood. In this study, ultra-high-performance liquid chromatography coupled with Orbitrap mass spectrometry was used to semi-quantitatively analyze 59 PM1 samples collected in Shanghai. NOCs accounted for 31 % and 64 % of the detected species in negative (ESI-) and positive (ESI+) ionization modes, respectively. Atmospheric aging significantly reduced the molecular diversity of polar organics, with both the number and mass concentration percentages of CHON- compounds showing significant negative correlations with aging degree. Van Krevelen analysis demonstrated a decrease in the number of carboxylic-rich alicyclic molecules and their CHON- contributions during the aging process (from 37.7 % in fresh samples to 21.2 % in aged samples). CHN+ compounds, a major NOCs group in ESI+ mode, also decreased with aging. Correlation analyses involving the Bep/(Bep+Bap) ratio, relative humidity, and mass absorption efficiency at 365 nm revealed a decline in light absorption capacity with aging, suggesting aqueous-phase oxidation as a dominant aging mechanism. CHON- and CHN+ compounds were identified as the principal light-absorbing constituents in PM1. This work provides new insights into the aging-induced transformations of NOCs in urban PM1, and their changing role in light absorption, highlighting the need for further investigation of the aging mechanisms of NOCs.

Aerosols↗