PubMed Health⌕ Search

PubMed · 343603

Fluorescein dye-dilution technique and retinal circulation.

Abstract

Using theoretical models for the flow of fluourescein dye in retinal arteries and veins, we have determined the effects of optical absorption in blood of the incident excitation light and the emitted fluorescent light on the time course of measured fluorescence intensity, I(t). Our results indicate that I(t) curves recorded from arteries adequately represent the mean time course of the fluorescein concentration (C(t)), when either a circular or rectangular light-collecting aperture is used. I(t) curves recorded from veins adequately represent C(t), but only when a circular aperture of approximately the same diameter as that of the vessel is used. A two-point fluorophotometer, which provides simultaneous, on-line measurements of arterial and venous I(t) curves is described. Typical recordings obtained with the instrument are shown and the method employed to analyze the curves quantitatively is described in detail. This method, which consists of fitting the first passage of the fluorescence intensity curve with a log-normal function, provides results that are more accurate than those obtained using the standard exponential extrapolation method.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

C E Riva, G T Feke, I Ben-Sira. 1978. Fluorescein dye-dilution technique and retinal circulation.. https://doi.org/10.1152/ajpheart.1978.234.3.h315

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Characterization of an artificial valve flow using the numerical dye washout visualization technique: application to the monoleaflet valve with purged flow.

Until today, no ideal heart valve prosthesis for the replacement of a diseased natural valve or for use in ventricular assist devices exists. Valves still cause thromboembolic complications originating from thrombus formations in the valve's stagnant zones. Optimization of valve design involves avoiding stagnation zones and zones of high shear stresses. This requires detailed flow field investigations. Usually, the regions which are more prone to thrombus formation can be estimated using a dye washout experiment. The method allows an assessment of regions with a high or low residence time that may in turn predict regions with a corresponding thrombus risk. This successful experimental method was simulated using numerical methods with a combination of the computational fluid dynamics program FLUENT (Fluent Inc., Lebanon, NH, USA) and of the visualization tool AMIRA (TGS Inc., San Diego, CA, USA). The numerical dye washout visualization was applied to four monoleaflet valves with varying valve housing geometries. The results show a significant difference in the washout processes of the examined valves. The dye washout was characterized by a time course of the gray value averaged over a defined region of interest. Finally, these curves were quantified by a half dye time. The half dye time in the best optimized valve was only 0.2753 s. The same time in the original valve was 0.6834 s. This study shows that the proposed numerical method of dye washout visualization can be used as an additional tool of the flow characterization in artificial organs.

Dye Dilution Technique↗

Estimations of changes in plasma volume during simulated weightlessness.

Results of previous investigations on the effects of simulated microgravity (thermoneutral (34.5 degrees C) head-out water immersion, WI) have indicated that plasma volume (PV) increases initially and thereafter decreases to attain values below the pre-immersion level. In these cases, changes in hematocrit (Hct) and hemoglobin concentration (Hgb) were used as indicators of relative changes in PV. In order to test whether changes in Hct and Hgb are accurate measures of changes in PV during simulated microgravity, direct measurements of PV were performed with a modified Evans blue dye dilution technique before, during, and after a 12 h WI experiment. Furthermore, PV was determined with the same technique before, during, and after acute 6 degrees head-down tilt (HDT). Changes in PV were then compared with changes calculated from changes in Hct and Hgb.

Dye Dilution Technique↗