Guidelines for external fixation frame rigidity and stresses.

R Huiskes; E Y Chao

doi:10.1002/jor.1100040108

Home/Archive/PubMed

PubMed · 3950810

Guidelines for external fixation frame rigidity and stresses.

R Huiskes·E Y Chao

View original source ↗Export metadata ↓

Abstract

Using results from FEM analyses and experiments as references, analytical methods are applied to develop simple approximate formulas to relate frame rigidity, maximal pin stresses, and peak pin-bone stresses in external fracture fixation (EFF) configurations in axial loading to the most important frame, pin, and bone parameters. It is found that, in a realistic range, the parameters can be adapted to vary the frame rigidity from about 13 N/mm to 17,000 N/mm, thereby reducing the maximal stresses in the pins and at the pin-bone interface by a factor of 140. In particular, when compromises have to be established in the frame characteristics in order to ensure a flexible configuration and limit the stress values at the same time, the formulas presented can provide useful guidelines. The side-bar separation and the pin modulus, in particular, can be adapted to decrease the rigidity, while only moderately increasing the stresses, thereby reducing changes for pin failure, pin-bone loosening, and pin-tract infection. A nomogram is presented for a quick reference to estimated relations between frame characteristics, rigidity, and stresses. It is believed that this material may be of use in EFF design and applications in clinical and animal experimental trials.

Explore related subjects

Biomechanical Phenomena Bone Nails Bone and Bones Equipment Design Fracture Fixation, Internal Humans Mathematics Models, Theoretical Orthopedic Fixation Devices Stress, Mechanical Journal Article

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

R Huiskes, E Y Chao. 1986. Guidelines for external fixation frame rigidity and stresses.. https://doi.org/10.1002/jor.1100040108

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2007

The effect of excessive tibial torsion on the capacity of muscles to extend the hip and knee during single-limb stance.

Excessive tibial torsion, a rotational deformity about the long axis of the tibia, is common in patients with cerebral palsy who walk with a crouch gait. Previous research suggests that this deformity may contribute to crouch gait by reducing the capacity of soleus to extend the knee; however, the effects of excess external torsion on the capacity of other muscles to extend the stance limb during walking are unknown. A computer model of the musculoskeletal system was developed to simulate a range of tibial torsion deformities. A dynamic analysis was then performed to determine the effect of these deformities on the capacity of lower limb muscles to extend the hip and knee at body positions corresponding to the single-limb stance phase of a normal gait cycle. Analysis of the model confirmed that excessive external torsion reduces the extension capacity of soleus. In addition, our analysis revealed that several important muscles crossing the hip and knee are also adversely affected by excessive tibial torsion. With a tibial torsion deformity of 30 degrees , the capacities of soleus, posterior gluteus medius, and gluteus maximus to extend both the hip and knee were all reduced by over 10%. Since a tibial torsion deformity reduces the capacity of muscles to extend the hip and knee, it may be a significant contributor to crouch gait, especially when greater than 30 degrees from normal, and thus should be considered by clinicians when making treatment decisions.

Biomechanical Phenomena↗

PubMed2007

Predicting the subject-specific primary stability of cementless implants during pre-operative planning: preliminary validation of subject-specific finite-element models.

Pre-operative planning help the surgeon in taking the proper clinical decision. The ultimate goal of this work is to develop numerical models that allow the surgeon to estimate the primary stability during the pre-operative planning session. The present study was aimed to validate finite-element (FE) models accounting for patient and prosthetic size and position as planned by the surgeon. For this purpose, the FE model of a cadaveric femur was generated starting from the CT scan and the anatomical position of a cementless stem derived by a skilled surgeon using a pre-operative CT-based planning simulation software. In-vitro experimental measurements were used as benchmark problem to validate the bone-implant relative micromotions predicted by the patient-specific FE model. A maximum torque in internal rotation of 11.4 Nm was applied to the proximal part of the hip stem. The error on the maximum predicted micromotion was 12% of the peak micromotion measured experimentally. The average error over the entire range of applied torques was only 7% of peak measurement. Hence, the present study confirms that it is possible to accurately predict the level of primary stability achieved for cementless stems using numerical models that account for patient specificity and surgical variability.

Biomechanical Phenomena↗

PubMed2007

Experimental validation of intact and implanted distal femur finite element models.

Four finite element (FE) models of intact and distal femur of knee replacements were validated relative to measured bone strains. FE models of linear tetrahedrons were used. Femoral replacements with cemented stemless, cemented and noncemented femoral stems of the PFC Sigma Modular Knee System were analyzed. Bone strains were recorded at ten locations on the cortex. The magnitude of the FE bone strains corresponded to the mean measured strains, with an overall agreement of 10%. Linear regression between the FE and mean experimental strains produced slopes between 0.94 and 1.06 and R(2) values between 0.92 and 0.99. RSME values were less than 12%. The FE models were able to adequately replicate the mechanical behavior of distal femur reconstructions.

Biomechanical Phenomena↗