PubMed · 399544
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
J F Clayson. 1979. Indirect spruing technique.. https://pubmed.ncbi.nlm.nih.gov/399544/
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
Fabrication of a fixed partial denture may require a soldering step. This study compared soldering by a conventional torch procedure with an infrared soldering technique. Comparisons were made for tensile strength, porosity, and time efficiency between the two methods. No significant difference was found in ultimate tensile strength between the two types of solder joints and the nonsoldered control samples. Random samples photographed with a scanning electron microscope revealed no difference in joint porosity between the two techniques. Torch soldering took consistently less time that infrared soldering.
The frequency of side-effects among dental patients is very low and is seen mostly as mild allergic reactions. Among the dental staff, contact allergic eczema is occasionally seen, induced by certain metals and various organic materials.
An in vitro evaluation of abrasive wear resistance of high-strength denture (HS) teeth and wear of metal plates (Pd alloy) on the opposing side was conducted. A total of 8 types of teeth were used in the experiments including 3 types of HS teeth, 3 types of conventional plastic denture (PL) teeth, porcelain teeth and metal teeth (Pd alloy). Sliding-induced wear tests were conducted by sliding these teeth over the metal plates. Abrasive wear resistance of the teeth was evaluated in terms of wear depth and weight loss. A comparison of wear depth showed that the abrasive wear resistance of HS teeth was 4.7 times that of PL teeth, 0.7 times that of porcelain teeth and 8.3 times that of metal teeth. Weight loss showed that the abrasive wear resistance of HS teeth was 3.3 times that of PL teeth, 0.2 times that of porcelain teeth and 11.4 times that of metal teeth. The weight loss of the metal plates was minimal when they slid over HS teeth, but increased in the order PL teeth, porcelain teeth and metal teeth.