PubMed · 4899377
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
Iu M Shelud'ko. [Complex plant viruses].. https://pubmed.ncbi.nlm.nih.gov/4899377/
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
A simple and inexpensive mount for securely holding resin-embedded tissues for trimming prior to sectioning for light or electron microscopy is described. The unit is composed of a base plate from which a 12.7-mm drill chuck protrudes. A tissue block is clamped into a microtome chuck and that is mounted in the drill chuck. A standard dissecting microscope is placed over the unit and used to magnify the block for trimming. Total cost of materials is estimated to be $20-40 USD.
A new preparation method has been developed in order to avoid the breaking of brittle samples for plan-view TEM investigation during and after mechanical and ion beam thinning. The thinning procedure is carried out on a reduced size piece of the sample (about 1.6 x 0.8 mm(2) or about 1-1.6 mm diameter) that is embedded into a 3-mm-diameter Ti disk, which fits the sample holder of the TEM. The small sample size and the supporting metal disk assure the mechanical stability and minimize the possibility of breaking during and after the preparation: The Ti disk is placed on adhesive kapton tape, a cut piece of the sample is put into the slot of the disk, pressed onto the tape and embedded with glue. The tape keeps the parts in place and in the same plane, keeps the sample surface safe from the embedding glue and can be removed easily after the glue solidifies. Subsequently, the embedded sample is thinned from the rear by well-known mechanical and ion beam techniques until electron transparency. This simple solution lowers the risk of failed sample preparation remarkably and makes it possible to reduce the thickness of the sample to about 50 microm by mechanical thinning. As a result, dimpling becomes unnecessary and low angle ion milling gives a large transparent area for TEM. Its efficiency has been proved by successful preparation of numerous thin film samples on Si, sapphire, and glass substrates. The method is compatible with the widespread cross-sectional thinning procedures, and can be easily adopted by TEM laboratories.
Recent measurements of ozone levels have led to concern that the stratospheric ozone layer is being depleted as a result of contamination with man-made chlorofluorocarbons. Concomitantly, the amounts of solar UV-B radiation reaching the Earth's surface is increasing. UV-B radiation has been shown to be harmful to living organisms, damaging DNA, proteins, lipids and membranes. Plants, which use sunlight for photosynthesis and are unable to avoid exposure to enhanced levels of UV-B radiation, are at risk. Thus, mechanisms by which plants may protect themselves from UV radiation are of particular interest. This review will summarizes the main aspects of ultraviolet radiation on plants at physiological and biochemical level, with particular emphasis on protective structures and mechanisms.