PubMed · 5252097
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
H K Huang, R S Ledley. Numerical experiments with a linear force-displacement tooth model.. https://doi.org/10.1177/00220345690480012101
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
A two-dimensional photoelastic stress analysis method was applied to study the relative magnitude of stress and concentration induced by four commercially available posts for endodontically treated teeth. Three types of threaded posts; VLock, Radix Anchor, and Flexi-Post, and one nonthreaded prefabricated post, the Para-Post Plus post were tested. Stress was recorded at installation, at vertical and inclined load, and the threaded posts were compared with the nonthreaded post. At installation and on loading, stress was induced where posts were in contact with the model. Higher apical stresses were demonstrated for the Para-Post Plus post whereas the threaded posts concentrated stress where they engaged the model through threads or flanges.
The distal and lateral forces and also the couples (in a transverse plane) delivered by the inner terminals of a face-bow have been derived analytically according to the complementary (strain) energy method for various face-bow configurations on the assumption that the terminals are rigidly held by the molar tubes and that the external forces acting are in the plane of the inner bow. The results of the theory have been checked experimentally with a specially designed apparatus in which two mild steel transducer pegs that carry three pairs of strain gauges were used to measure the force system delivered by the inner bow under a range of loading, both symmetrical and asymmetrical. Good agreement with the theory was obtained, confirming the validity of the theoretical analysis. It is concluded that force systems are dependent on bow geometry and that with increasing asymmetry of the external loading transference of the distal load to the power-arm side is accompanied by a shift of lateral force and couple to the opposite side.
Explore the source record for details and available documents.