PubMed · 5719637
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
J Blanch, F García, A Arancibia. 1968. [Prolonged-action tablets with plastic matrix].. https://pubmed.ncbi.nlm.nih.gov/5719637/
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
This paper, a continuation of our previous work, is a presentation of the effects of slight deformations of both the coating film and the drug matrix on the concentration distributions and the slow release characteristics of a coated drug particle. The coated particle shape, in practice, is not perfectly spherical. With restriction of the deformation shape functions considered, it is noted that if the deformation is slight or if only the average release rate is of interest, the effects of shape deformation are secondary. Otherwise, the shape deformation can have a significant effect on the concentration profiles and/or the release rate from different parts of the particle surface. The deformations of both coating film and the drug matrix could introduce a greater deviation from the spherical case than those considering only coating film or drug matrix shape deformation.
A new binary polymer matrix tablet for oral administration was developed. The system will deliver drug at variable rates according to zero-order kinetics for total drug content and is manufactured by direct compression technology. Highly methoxylated pectin and hydroxypropyl methylcellulose (HPMC) at different ratios were used as major formulation components, and prednisolone was used as the drug model. The results indicate that by increasing pectin:HPMC ratios, release rates are increased, but zero-order kinetics prevail throughout the dissolution period (e.g., 3-22 h). Different pectin:HPMC ratios provide a range of viscosities that modulates drug release and results in rapid hydration/gelation in both axial and radial directions, as evidenced by photomicrographic pictures. This hydration-gelation contributes to the development of swelling/erosion boundaries and consequently to constant drug release. Combination of these particular polymers facilitates rapid formation of necessary boundaries (i.e., gel layer and solid core boundaries) to control overall mass transfer processes. The drug fraction released (Mt/M infinity), release kinetics, and mechanism of release were analyzed by applying the simple power law expression Mt/M infinity = kt(n), where k is a kinetic constant and the exponent n is indicative of the release mechanism. The calculated n values for pectin:HPMC ratios of 4:5, 3:6, and 2:7 were >0.95, which is indicative of a Case II transport mechanism (polymer relaxation/dissolution). The achievement of total zero-order kinetics is due to the predictable swelling/erosion and final polymer chain deaggregation and dissolution that is regulated by the gelling characteristics of polymers in the formulation.
The significance of factors such as drug solubility, polymer molecular weight, drug loading dose, compression force, and hydrodynamic conditions on drug release from a swellable hydrophilic delivery system was investigated. Hydroxypropyl methylcellulose (HPMC) and pectin were major polymeric constituents of the delivery system. Nifedipine, prednisolone, theophylline anhydrous, and diltiazem hydrochloride with solubilities of < 0.001%, <0.1%, <1%, and >50%, respectively, were used as drug models. Results show that changes in pectin:HPMC ratios, HPMC molecular weight, and hydrodynamic conditions exert notable influences on release rate and release duration from the designed system. In the case of prednisolone, drug loading up to 30% (w/w) of the matrix composition (pectin:HPMC K4M; 3:6) had no effect on zero-order release kinetics, and the delivery system was insensitive to changes in compression force (2000 to 5000 lb). For nifedipine, theophylline, and diltiazem, determination of mean dissolution time (MDT) for 50 and 80% drug release provided accurate information on release behavior. The dominating effect of matrix composition over variations in drug solubilities in controlling drug release from the delivery system was evident from similarities in dissolution profiles. It is further shown that hydrodynamic stress and intensity of fluid flow causes greater attrition at the swollen periphery and is responsible for dramatic increases in release rates. This latter observation confirms that the mechanism of drug release from this swellable system is erosion dependent. Influence of polymer molecular weight and drug solubility on release kinetics and the potential of the delivery system is discussed.