PubMed · 5795708
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
T S Kotova, M V Dalin. 1967. [Obtaining immunosorbents from aminocellulose].. https://pubmed.ncbi.nlm.nih.gov/5795708/
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
Hydrogen embrittlement of work-hardened Ni-Ti alloy has been examined in acidulated phosphate fluoride (APF) solutions. Upon immersion in a 2.0% APF solution with a pH of 5.0, tensile strength decreased markedly with immersion time. Moreover, the fracture mode changed from ductile to brittle due to brittle layer formation at the peripheral part of the cross section of the specimen. The amount of absorbed hydrogen increased linearly with immersion time, and it reached above 5000 mass ppm after 24 h. The hydrogen desorption temperature of the immersed specimens shifted from 450 degrees C to a lower temperature with immersion time. As the amount of absorbed hydrogen was larger than 500 mass ppm, the degradation of mechanical properties was recognized. Although the tensile properties and fracture mode scarcely change in a 0.2% APF solution, the slight reduction in hardness and hydrogen absorption of several hundreds mass ppm were observed. The results of the present study imply that work-hardened Ni-Ti alloy is less sensitive to hydrogen embrittlement compared with Ni-Ti superelastic alloy.
The fact that heavy metals can enter various domains of the plant system through foliar pathways spurred us to explore if the fronds of the Chinese brake fern (Pteris vittata L.), a hyperaccumulator of arsenic, a carcinogenic metalloid, was proficient in absorbing arsenic in the form of sprays. The specific objective of this study was to investigate the impact of frond age, form of arsenic, and time of application on the absorption of foliar-applied arsenic by the brake fern; also examined were the effects of foliar sprays on surface ultrastructure and arsenic speciation in the frond following absorption. Foliar sprays of different arsenic concentrations (0, 50, 100, 200, and 400 ppm) were applied to young and fertile fronds. A positive linear relationship existed between arsenic concentration and absorption; the arsenic concentration of fronds increased from 50 to 200 ppm. Time-course analysis with excised pinnae indicated an initial linear increase followed by a plateau at 48 h. The young fronds with immature sori absorbed more arsenic (3100 ppm) than the fertile mature fronds (890 ppm). In the frond, the arsenic absorption was greatest in the lamina of the pinnae followed by the sori and the rachis. Applying arsenic during night (20:00-22:00 h) or afternoon (12:00-14:00 h) resulted in greater absorption of arsenic than the application in the morning (08:00-10:00 h). The arsenic absorption was greater through abaxial surfaces than through adaxial surfaces. The brake fern absorbed more arsenic when it was applied in the form of arsenite. Regardless of the form of arsenic and the surface it was applied to, arsenic occurred as arsenite, the reduced and the most toxic form of arsenic, after having been absorbed by the fronds. Scanning electron microscopy revealed no surface morphological alterations following all arsenic sprays. The study unequivocally illustrated that the Chinese brake fern absorbed foliar-applied arsenic with great efficiency. Consequently, the arsenic concentrations in the fronds transcended the levels of hyperaccumulation; such a characteristic could be exploited in the phytoremediation of groundwater contaminated with arsenic.
Three heme-proteins, including myoglobin (Mb), hemoglobin (Hb) and horseradish peroxidase (HRP), were immobilized on edge-plane pyrolytic graphite (EPG) electrodes by agarose hydrogel. The proteins entrapped in the agarose film undergo fast direct electron transfer reactions, corresponding to FeIII = e- --> FeII. The formal potential (E degrees'), the apparent coverage (Gamma), the electron transfer coefficient (alpha) and the apparent electron transfer rate constant (ks) were calculated by integrating cyclic voltammograms or performing nonlinear regression analysis of square wave voltammetric (SWV) experimental data. The E degrees's are linearly dependent on solution pH (redox Bohr effect), indicating that the electron transfer was proton-coupled. Ultraviolet visible (UV-Vis) and reflection-absorption infrared (RAIR) spectra suggest that the conformation of proteins in the agarose film are little different from that proteins alone, and the conformation changes reversibly in the range of pH 3.0-10.0. Atomic force microscopy (AFM) images of the agarose film indicate a stable and crystal-like structure formed possibly due to the synergistic interaction of hydrogen bonding between N,N-dimethylformamide (DMF), agarose hydrogel and heme-proteins. This suggests a strong interaction between the heme-proteins and the agarose hydrogel. DMF plays an important role in immobilizing proteins and enhancing electron transfer between proteins and electrodes. The mechanisms for catalytic reduction of hydrogen peroxide and nitric oxide (NO) by proteins entrapped in agarose hydrogel were also explored.