Permeation through five commercially available glove materials by two pentachlorophenol formulations.

J B Silkowski; S W Horstman; M S Morgan

doi:10.1080/15298668491400179

Home/Archive/PubMed

PubMed · 6475756

Permeation through five commercially available glove materials by two pentachlorophenol formulations.

J B Silkowski·S W Horstman·M S Morgan

View original source ↗Export metadata ↓

Abstract

Five glove materials were tested for permeation by two commonly used formulations of pentachlorophenol (PCP). Permeation was conducted using the method used in two prior studies by NIOSH. The lower limit of PCP quantitation in the receiving side of the permeation cell was 70 parts per billion (ppb). When challenged with a 4.3% PCP in diesel oil solution, both the Dayton Flexible Products Triflex (PVC) and the Best 64 NFW (natural rubber) gloves exhibited breakthrough times thirty seconds after exposure. The Playtex #835 (latex/neoprene) glove exhibited breakthrough after sixty minutes, but showed a five fold greater rate of permeation than the Dayton and the Best glove. Neither the Edmont Sol-Vex (nitrile rubber) nor the Granet Glo-Gluv (PVC) gloves had been permeated after testing for 8 and 16 hours respectively. Following challenge with a 4.2% sodium pentachlorophenate solution, only the Best (natural rubber) glove allowed breakthrough; this only thirty seconds after exposure. Neither the Dayton (5 hours), Playtex (7.5 hours), Edmont (15.5 hours), nor Granet (15.5 hours) gloves had been permeated following completion of testing after the listed duration. This study has shown that different gloves offer differing resistance to permeation by PCP based upon the composition of the glove and the PCP formulation tested.

Explore related subjects

Chlorophenols Chromatography, Gas Pentachlorophenol Permeability Protective Clothing Journal Article Research Support, U.S. Gov't, P.H.S.

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

J B Silkowski, S W Horstman, M S Morgan. 1984. Permeation through five commercially available glove materials by two pentachlorophenol formulations.. https://doi.org/10.1080/15298668491400179

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2006

Degradation mechanisms of 4-chlorophenol in a novel gas-liquid hybrid discharge reactor by pulsed high voltage system with oxygen or nitrogen bubbling.

The effect of gas bubbling on the removal efficiency of 4-chlorophenol (4-CP) in aqueous solution has been investigated using a novel pulsed high voltage gas-liquid hybrid discharge reactor, which generates gas-phase discharge above the water surface simultaneously with the spark discharge directly in the liquid. The time for 100% of 4-CP degradation in the case of oxygen bubbling (7 min) was much shorter than that in the case of nitrogen bubbling (25 min) as plenty of hydrogen peroxide and ozone formed in oxygen atmosphere enhanced the removal efficiency of 4-CP. Except for the main similar intermediates (4-chlorocatechol, hydroquinone and 1,4-benzoquinone) produced in the both cases of oxygen and nitrogen bubbling, special intermediates (5-chloro-3-nitropyrocatechol, 4-chloro-2-nitrophenol, nitrate and nitrite ions) were produced in nitrogen atmosphere. The reaction pathway of 4-CP in the case of oxygen bubbling was oxygen/ozone attack on the radical hydroxylated derivatives of 4-CP. However, in the case of nitrogen bubbling, hydroxylation was the main reaction pathway with effect of N atom on degradation of 4-CP.

Chlorophenols↗

PubMed2006

Development of a solid-phase microextraction method with micellar desorption for the determination of chlorophenols in water samples. Comparison with conventional solid-phase microextraction method.

A novel analytical method is presented for the determination of chlorophenols in water. This method involves pre-concentration by solid-phase microextraction (SPME) and an external desorption using a micellar medium as desorbing agent. Final analysis of the selected chlorophenols compounds was carried out by high-performance liquid chromatography (HPLC) with diode array detection (DAD). Optimum conditions for desorption, using the non-ionic surfactant polyoxyethylene 10 lauryl ether (POLE), such as surfactant concentration and time were studied. A satisfactory reproducibility for the extraction of target compounds, between 6 and 15%, was obtained, and detection limits were in the range of 1.1-5.9ngmL(-1). The developed method is evaluated and compared with the conventional one using organic solvent as a desorbing agent. The method was successfully applied to the determination of chlorophenols in water samples from different origin. This study has demonstrated that solid-phase microextraction with micellar desorption (SPME-MD) can be used as an alternative to conventional SPME method for the extraction of chlorophenols in water samples.

Chlorophenols↗

PubMed2006

POPs and organic polysufides in sediments of Lake Ladoga.

The study included one station close to a pollution source (depth 59 m) and another far from polluted areas (depth 40 m). Samples were analysed for organic chlorine, bromine and sulfur compounds. Samples taken with a corer were sliced to the layers of 0-1, 1-4, 4-7 cm etc. down to the depth of 34 cm. The dating was made with two independent methods, the 210Po method and with the soot particle counting method. The analyses were made with a multiresidue method. Gas chromatography was connected to low resolution mass spectrometry (LRMS) or to high resolution mass spectrometry (HRMS). A different extraction was applied to screen the possible occurrence of polysulfides. Typical chlorophenol and chlorohydrocarbon traces from chlorobleaching of pulp were non-detectable. Also PCDDs, PCDFs, PCBs and various organochloride pesticides, fire retardant residues PBDEs, PBDDs and PBDFs and polychlorinated phenyl salicylates were not detected. Instead, methylated dibenzothiophenes Me-DBTs and Di-Me-DBTs, typical traces of oil based defoamers used in e.g. paper mills were found in the surface layers of the polluted site. Polysulfides were analyzed from layers representing years 1955-1970 from the polluted site. The structures of five congeners were according to GC/MS dimethyl trisulfide, 1,2,3,4-tetrathiepane, pentathiane, 1,2,3,4-tetrathiane and 1,2,4,5-tetrathiepane. Many of the analyzed pollutants have not been reported earlier from Lake Ladoga. The only positive observations were from oil-based defoamers used in paper mills, and from polysulfides, which are either of natural origin or indicate a discharge in the 1950s and 1960s. Owing to the large spreadout and dilution, the concentrations are low even at moderate distances from the pollution centers.

Chlorophenols↗